Pressure Washer Pumps & Repair Kits

20 Products
Stens 030-007 General Pump Pressure Washer PumpGeneral Pump TC1506GUI
  • Cat. Page #:1567
  • Pack Size:ea
  • Qty / Unit:1
  • Crankcase oil capacity 11.8 oz.
  • Flanged for direct couple to gasoline engines; 3/4" hollow shaft
  • Flooded pump dimensions 10.4" x 8" x 7.7"
  • Gauge port 1/8" maximum inlet required
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165 F
  • Maximum inlet pressure: 125 PSI
  • Premium built-in trapped pressure unloader on left side of manifold with an exclusive lifetime warranty
  • TC Series 60, Triplex plunger pump, SAE J609A
  • Bore Size0.591"
  • Gallons Per Minute2.600
  • HP7.210
  • Made ByAn OEM Supplier
  • PSI2700
  • TypeHorizontal Gas Flanged
  • Stens 030-011 General Pump Pressure Washer PumpGeneral Pump TX1508G8UI
    • Cat. Page #:1567
    • Pack Size:ea
    • Qty / Unit:1
  • Built-in unloader and downstream injector on left side of manifold
  • Crankcase oil capacity 14 oz.
  • Flanged for direct couple to gasoline engines; 1" hollow shaft unloader and downstream injector on left side of manifold
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Large, lightweight connecting rods, New long life low and high pressure seals and forged brass manifold with exclusive lifetime warranty
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165° F
  • Maximum inlet pressure: 125 PSI
  • Maximum inlet required, flooded
  • TX Series 63, Triplex plunger pump, SAE J609B
  • Bore Size0.591"
  • Gallons Per Minute3
  • HP9.200
  • Made ByAn OEM Supplier
  • PSI3000
  • TypeHorizontal Gas Flanged
  • Stens 030-027 General Pump Pressure Washer PumpGeneral Pump TS1511
    • Cat. Page #:1568
    • Pack Size:ea
    • Qty / Unit:1
  • Crankcase oil capacity 40.6 oz.
  • Forged brass manifold with exclusive lifetime warranty, heavy-duty tapered roller bearings and oversized connecting rods for maximum life
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165° F
  • Maximum inlet pressure 125 PSI
  • Maximum inlet vacuum 9 ft., water (7.9" Hg)
  • Pump dimensions 12.6" x 9.2" x 6.9"
  • Solid shaft diameter .945"
  • T Series 47, Triplex plunger pump
  • Bore Size0.787"
  • Gallons Per Minute4
  • HP9.600
  • Made ByAn OEM Supplier
  • PSI3500
  • TypeSolid Shaft
  • Stens 030-023 General Pump Pressure Washer PumpGeneral Pump EZ3040GUI
    • Cat. Page #:1568
    • Pack Size:ea
    • Qty / Unit:1
  • Crankcase oil capacity 14 oz.
  • EZ Series 44, Triplex plunger pump, SAE J609B
  • Flanged for direct couple to gasoline engines up to 13 HP; hollow shaft
  • Hollow shaft diameter 1"; Forged brass manifold with exclusive lifetime warranty
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165° F
  • Maximum inlet pressure: 125 PSI
  • Maximum inlet vacuum 3 ft., water (2.6" Hg)
  • Pump dimensions 8.8" x 9.7" x 6.5"
  • Bore Size0.591"
  • Gallons Per Minute4
  • HP14.400
  • Made ByAn OEM Supplier
  • PSI3000
  • TypeHorizontal Gas Flanged
  • Stens 030-015 General Pump Pressure Washer PumpGeneral Pump TX1510G8UI
    • Cat. Page #:1567
    • Pack Size:ea
    • Qty / Unit:1
  • Built-in unloader and downstream injector on left side of manifold
  • Crankcase oil capacity 14 oz.
  • Flanged for direct couple to gasoline engines; 1" hollow shaft
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Large, lightweight connecting rods, New long life low and high pressure seals and Forged brass manifold with exclusive lifetime warranty
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165° F
  • Maximum inlet pressure: 125 PSI
  • Maximum inlet required, flooded
  • TX Series 63, Triplex plunger pump, SAE J609B
  • Bore Size0.591"
  • Gallons Per Minute4
  • HP12.300
  • Made ByAn OEM Supplier
  • PSI3000
  • TypeHorizontal Gas Flanged
  • Stens 030-031 General Pump Pressure Washer PumpGeneral Pump TS2021
    • Cat. Page #:1568
    • Pack Size:ea
    • Qty / Unit:1
  • Crankcase oil capacity 40.6 oz.
  • Inlet port thread 1/2"-14 BSP-F and Discharge port thread 3/8"-19 BSP-F
  • Manufacturer warranty applies
  • Maximum fluid temperature: 165° F
  • Maximum inlet pressure: 125 PSI
  • Maximum inlet vacuum 9 ft., water (7.9 Hg)
  • Nickel-plated forged brass manifold with exclusive lifetime warranty, heavy-duty tapered roller bearings and oversized connecting rods for maximum life
  • Pump dimensions 12.6" x 9.2" x 6.9"
  • Solid shaft diameter .945"
  • T Series 47, Triplex plunger pump
  • Bore Size0.787"
  • Gallons Per Minute4.500
  • HP10.800
  • Made ByAn OEM Supplier
  • PSI3500
  • TypeSolid Shaft
  • Stens 030-311 Comet Pump Pressure Washer PumpComet Pump 6525.1005.00
    • Cat. Page #:1566
    • Pack Size:ea
    • Qty / Unit:1
  • 1/2" FGH Inlet - 3/8" MPT Outlet
  • Built-in easy start, uniflow unloader and chemical injector
  • Capacity of 4.5 oz pump oil
  • Inlet port thread: 1/2" FPT and Discharge port thread: 3/8" MPT
  • Manufacturer warranty applies, Pump is shipped with oil from manufacturer
  • Maximum fluid temperature: 145°F
  • Maximum inlet pressure: 120 PSI
  • One oil cap for travel and operation
  • Quick mount flange, Stainless steel plungers, Steel shaft with built-in key, Stainless steel check valves, Forged brass manifold and Patent registered ball bearing design
  • Shaft diameter 3/4"
  • Bore Size0.591"
  • Gallons Per Minute2.800
  • HP7.700
  • Made ByAn OEM Supplier
  • PSI2500
  • TypeHorizontal Gas Flanged
  • Stens 030-303 Comet Pump Pressure Washer PumpComet Pump 6525.0001.00
    • Cat. Page #:1566
    • Pack Size:ea
    • Qty / Unit:1
  • 1/2" FGH Inlet - 3/8" MPT Outlet
  • Built-in easy start with uniflow unloader and chemical injector
  • Capacity of 4.5 oz pump oil
  • Inlet port thread: 1/2" FPT and Discharge port thread: 3/8" MPT
  • Manufacturer warranty applies, Pump is shipped with oil from manufacturer
  • Maximum fluid temperature: 145°F
  • Maximum inlet pressure: 120 PSI
  • One oil cap for travel and operation
  • Shaft diameter: 3/4"
  • Steel shaft with built-in key, Quick mount flange, Stainless steel plungers and check valves, Forged brass manifold and Patent registered ball bearing design
  • Bore Size0.591"
  • Gallons Per Minute2.200
  • HP6.400
  • Made ByAn OEM Supplier
  • PSI2500
  • TypeHorizontal Gas Flanged
  • Stens 030-450 General Pump Pressure Washer PumpGeneral Pump EZ4040G
    • Cat. Page #:1568
    • Pack Size:ea
    • Qty / Unit:1
  • Die-cast, anodized aluminum oil-bath crankcase
  • Forged brass manifold with a 3:1 hydrostatic rating
  • Innovative one-piece plunger design to eliminate water entering crankcase
  • Premium roller bearing
  • Shaft diameter: 1"
  • Standard SAE J609 gasoline mounting flange for up to 13 HP engines
  • Triplex plunger pump with hollow shaft
  • Unitized stainless steel inlet and discharge valves
  • Bore Size0.512"
  • Gallons Per Minute3.500
  • HP16.400
  • Made ByAn OEM Supplier
  • Packaging typeOEM package
  • PSI4000
  • RPM3400
  • TypeEZ Series 44
  • Stens 030-458 General Pump Pressure Washer PumpGeneral Pump EP1313G8
    • Cat. Page #:1567
    • Pack Size:ea
    • Qty / Unit:1
  • 1" Hollow shaft
  • New dual diameter plunger guide, optimized outlet valves and dual lip oil seals
  • New forged brass manifold that increases working pressure
  • New plunger guide bushing
  • SAE J609B
  • Shaft is flanged for direct couple to gas engines
  • Solid ceramic plungers with dual guide systems
  • Triplex plunger pump
  • Bore Size0.512"
  • Gallons Per Minute4
  • HP16.400
  • Made ByAn OEM Supplier
  • Packaging typeOEM package
  • PSI4000
  • RPM3400
  • Size1
  • TypeEP Series Pump
  • Stens 030-454 General Pump Pressure Washer PumpGeneral Pump ET1506G6
    • Cat. Page #:1566
    • Pack Size:ea
    • Qty / Unit:1
  • Hollow shaft, flanged for direct couple to gasoline engines
  • New generation seal package, dust protection chamber, oversized plunger guide, optimized inlet and outlet valves, oil seals and oversized crankcase
  • Nickel-plated cast manifold
  • Shaft diameter: 3/4" hollow
  • Solid ceramic plungers
  • Triple plunger pump
  • Bore Size0.591"
  • Gallons Per Minute3.200
  • HP8.600
  • Made ByAn OEM Supplier
  • Packaging typeOEM package
  • PSI2610
  • RPM3400
  • TypeET Series Pump
  • Stens 758-983 Stens Pressure Washer Pump3000 PSI; 2.3 GPM
    • Cat. Page #:1569
    • Pack Size:ea
    • Qty / Unit:1
  • 3/4" FNPT Inlet
  • 3/4" Hollow Shaft
  • Axial style
  • M 22mm Outlet
  • Gallons Per Minute2.300
  • GHP6.500
  • IncludesAdjustable Unloader Valve, Chemical Injector, Breathing Cap and Oil Sight Glass
  • Packaging typeBranded box
  • PSI3000
  • RPM3400
  • TypeHorizontal
  • Stens 758-985 Stens Pressure Washer Pump3000 PSI; 2.3 GPM
    • Cat. Page #:1569
    • Pack Size:ea
    • Qty / Unit:1
  • 3/4" FNPT Inlet
  • 3/4" Hollow Shaft
  • 3/8" Coupler Outlet
  • Axial style
  • Gallons Per Minute2.300
  • GHP6.500
  • IncludesAdjustable Unloader Valve, Thermal Valve, Chemical Injector, Breathing Cap and Oil Sight Glass
  • Packaging typeBranded box
  • PSI3000
  • RPM3400
  • TypeHorizontal
  • Stens 758-342 Stens Pressure Washer Pump3000 PSI; 2.7 GPM
    • Cat. Page #:1569
    • Pack Size:ea
    • Qty / Unit:1
  • 1/2" FNPT Inlet
  • 3/4" Hollow Shaft
  • 3/8" MNPT Outlet
  • Triplex style
  • Gallons Per Minute2.700
  • GHP6.500
  • IncludesAdjustable Unloader Valve, Chemical Injector, Breathing Cap and Oil Sight Glass
  • Packaging typeBranded box
  • PSI3000
  • RPM3400
  • TypeHorizontal
  • Stens 758-344 Stens Pressure Washer Pump3600 PSI; 4.0 GPM
    • Cat. Page #:1569
    • Pack Size:ea
    • Qty / Unit:1
  • 1" Hollow Shaft
  • 1/2" FNPT Inlet
  • 3/8" MNPT Outlet
  • Triplex style
  • Gallons Per Minute4
  • GHP13.500
  • IncludesAdjustable Unloader Valve, Chemical Injector, Breathing Cap and Oil Sight Glass
  • Packaging typeBranded box
  • PSI3600
  • RPM3400
  • TypeHorizontal
  • Stens 758-340 Stens Pressure Washer Pump2500 PSI; 2.9 GPM
    • Cat. Page #:1569
    • Pack Size:ea
    • Qty / Unit:1
  • 1/2" FNPT Inlet
  • 3/4" Hollow Shaft
  • 3/8" MNPT Outlet
  • Triplex style
  • Gallons Per Minute2.900
  • GHP6.500
  • IncludesAdjustable Unloader Valve, Chemical Injector, Breathing Cap and Oil Sight Glass
  • Packaging typeBranded box
  • PSI2500
  • RPM3400
  • TypeHorizontal
  • Stens 758-987 Stens Pressure Washer Pump2500 PSI, 2.2 GPM
    • Cat. Page #:1565
    • Pack Size:ea
    • Qty / Unit:1
  • Keyway 3/16"
  • Shaft diameter: 3/4" hollow
  • Gallons Per Minute2.200
  • HP5.500
  • PSI2500
  • Stens 758-905 Stens Pressure Washer Pump2500 PSI, 2.2 GPM
    • Cat. Page #:1565
    • Pack Size:ea
    • Qty / Unit:1
  • 7/8" Key Shaft
  • Detergent suction device
  • Does not have adjustable unloader
  • Inlet: 3/4" NH Male
  • Outlet: 22mm Male
  • Thermal valve protects pump from overheating
  • Gallons Per Minute2.200
  • HP5.500
  • PSI2500
  • TypeVertical
  • Stens 758-909 Stens Pressure Washer Pump3000 PSI, 2.3GPM
    • Cat. Page #:1565
    • Pack Size:ea
    • Qty / Unit:1
  • 7/8" Key Shaft
  • Detergent suction device
  • Forged solid brass pump head
  • Inlet: 3/4" NH Male
  • Outlet: 22mm Male
  • Thermal valve protects pump from overheating
  • Gallons Per Minute2.300
  • HP6.500
  • PSI3000
  • TypeVertical
  • Stens 758-989 Stens Pressure Washer Pump3000 PSI 2.4 GPM
    • Cat. Page #:1565
    • Pack Size:ea
    • Qty / Unit:1
  • 22mm male outlet
  • 3/4" NH male inlet
  • Adjustable Unloader
  • Detergent suction device
  • Shaft diameter: 3/4"
  • Thermal valve protects pump from overheating
  • Gallons Per Minute2.400
  • HP7
  • PSI3000
  • RPM3400
  • TypeHorizontal Gas Flanged