Wood lathe accessories: How to buy the right one?

Wood lathe accessories offer a breadth of choices that can be added to your lathe. Accessories are great ways to help enhance the experience, refine the process and open doors to new chances to create even more exciting products using your lathe.

Adding the right accessories is a great way to give a wide range of various functionalities and improve your lathe become a better tool all around. There are many types of lathe accessories, so you must consider what you want and need. Some of the various wood lathe accessories that you can choose from are

Disclosure: As an Amazon Associate I earn from qualifying purchases.

Types of wood lathe accessories



The faceplate is an essential accessory for your lathe since you can affix just about any shape or material to the lathe with the right faceplate. The faceplate is circular and made of cast iron. It contains holes which you can use to t-nuts to affix the workpiece to it. When you have the piece connected to the faceplate, you would use threaded studs of the lathe itself.

The faceplate permits you to open up the possibilities for different beginning shapes and even the finished products which you will design and create.


A mandrel is a clamp which is used to keep pieces of wood in place as the turn on the lathe. There is a lot of mandrels you can choose from and it depends on the type of work as well as the material that you are working on to determine which one is right for you.

If you can’t find a mandrel that suits your specific needs, it's possible to have custom made mandrels. The more work you do with the lathe, the more you’ll realize the significance of mandrels.

Boring Bars

Boring is a technique that used for drilling in woodworking. The boring tool is used to form circular plunge cuts and it is static in size. This is one of many great accessories that you can attach to your lathe. Note that you will need a boring bar holder also. You should verify whether a store has wood lathe accessories for sale and purchase a boring bar with a holder.

Roughing Gouges

Roughing gouges are used to rough the wood from square to round. These tools fall under the miniature woodworking tools category. They are typically formed from high-speed steel and roughly U-shaped in cross-section.

This tool is used to remove stock quickly when the cutting edge is sharpened around 40-45 degrees. You can move it in either direction, but will often leave an inferior finish. You must have this tool for woodworking job unless you work only on bowls or platters.

Skew Chisels

After getting a cylindrical piece of wood using the roughing gouge tool, you likely need to "plane" the wood. A skew chisel will do this job. These tools come in various sizes and differently shaped cross-sections

This tool is utilized by laying it on the work piece with its edge forming a 45-degree with the axis of the work piece. The bevel is located to rub on the rotating work, the point of cutting should be in the center to lower half of the cutting edge. The chisel edges are normally grounded to get an angle between 60 and 80 degrees as well.

This tool is very versatile and it should be added to your list of wood lathe supplies.


Spindle Gouges

Spindle gouges are fundamentally used to turn coves. Coves are simply rounded grooves or scallops in the surface of the wood. These tools come in various sizes and have a semicircular cross-section

The difference between rough gouges and spindle gouges is that the groove running the length of the blade is shallower in spindle gouges than roughing gouges. The cutting edge of a spindle gouge can be ground to any angle from 30 to 45 degrees, depending on turning style and personal preference. Most experienced turners now can grind their spindle gouges

Parting and Beading Tools

You need the parting and beading tools to turn a square-bottomed groove or cut your turning off at the ends. Three parting tools include the fluted parting tool, the diamond-section parting tool and the original parting tool. These tools are ground to provide an included angle of 60 to 90 degrees. However, the fluted version has just one bevel to grind. The parting and beading tool is likely same a square-section parting tool. This tool is typically utilized for shallower cuts than regular parting tools and it's useful when forming beads.

Center Finder

Locate the center of any square or round stock for lathe turning with a center finder tool. Many versions of this tool have one side locates a diagonal line on a round stock and another side locates a diagonal line on a square stock. You will find the center of stock by marking 2 opposite diagonal lines. This tool is just one of many wood lathe accessories that are a must have.

Bowl Gouges

Bowl gouges are ground square across and not ground back towards the upper edges of the flute. These gouges have also more variants than any other tool and one should ask experienced workers what makes one better than another for specific jobs.

An important feature of bowl gouges is that they are very rigid and they need to be robust to perform well. These tools are ground around 40 to 55 degrees, however, can change be found at varying angles. It relies on the internal form of the bowl whether you want a different angle. You should try multiple bowl gouges to decide which one works best for you



Scrapers are utilized to accomplish a fine internal finish on woodwork such as bowls. Unlike other tools discussed, these are utilized with the tip of the cutting edge and no bevel rubbing. They come in many sizes and shapes and they are often reground by turners to suit individual jobs.

An awesome starter item for a beginner would be the PSI woodworking LCHSS8-HSS wood lather chisel 8 piece set. This kit is perfect for people who wants to turn small pens, spindles, bowls, and larger projects.


A collet is a clamp or ring that is utilized to affix the workpiece to the lathe. This collet is externally threaded onto the lathe and often has a holding capacity that ranges from 0 to 7 inches in diameter. These collets are also designed to hold various shapes, such as square, circular and hexagonal.

  • Most Popular

  • Product Reviews

  • From the Blog

  • Daily Deals

  • Lathe Experts Free Amazon Prime Trial

  • Leave a Reply Cancel reply

    Your email address will not be published.

    About | Contact | Terms | Privacy Policy | Affiliate Disclosure | Disclaimer | Write for us | Follow us
    COPYRIGHT © 2019 LatheExperts.com All rights reserved.
    linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram