MUBEA KBL-0F
33 Ton Muber KBL-OF Ironworker
PEDDINGHAUS PEDDY
38 TON PEDDINGHAUS,9/16 IN 3/8,1 1/4" IN 3/16,FLAT SHEAR 4"X3.8" 1978
EDWARDS 50
50 Ton Ironworker with Electric Foot Pedal with Integrated Jog Control, 4 Work Stations (Punching, Flat Bar Shear, Angle Shear & Copper Notcher), Adjustable Electric Stoke Control
EDWARDS 50 TON
50 Ton New Edwards Ironworker, 2021 - W/ Powerlink System
EDWARDS JAWS IV
*** WE TAKE TRADES | 50 ton Edwards ironworker, Refurbished in Sept 2021 with: NEW punch die block assembly & punch table; NEW punch holder; NEW coper table assembly & blades (top & bottom); Foot p...
SCOTCHMAN 5014-CM
Scotchman 5014-CM 50 Ton Hydraulic Ironworker
EDWARDS 55
55 Ton Ironworker with 4 Workstations (Punch, Flat Bar Shear, Angle Shear, 10" Brake), 4 - Way Die Allowing 1/16", 1/8", 3/16" and 1/4" To Be Formed to a 90° Angle, Oversized Punch Assembly, 10" Br...
EDWARDS 55 TON
55 Ton New Edwards Ironworker, 2021 - W/ Powerlink System
EDWARDS 55 TON
Edwards 55 Ton Jaw IV Hydraulic Ironworker
GEKA MINICROP
Machine 29245 Geka Minicrop Ironworker Geka 55 Ton Minicrop Ironworker 55 Tons, Year: 1997 Single cylinder universal ironworker with 4 workstations: Punching Power 52 US Tons Punching Ø1-1/8...
GEKA PUMA 55/E-750
55 Ton Geka Puma 55/E-750 Punch Press,2016- Less than 50 hours, Tooling Included
GEKA HYDRACROP
60 Ton Hydraulic Ironworker with Two Simultaneous Work Stations (One Punch and One Shear.)
GEKA HYDRACROP 55/A
60 Ton 10" Throat Geka HYDRACROP 55/A IRONWORKER
HILL-ACME #4
4" x 4" x 1/2" Hill Acme, 60 ton, 8" shear, dual operater, 1979
PEDDINGHAUS 210 SUPER 13
Manufacturer: Peddinghaus, profile steel shears with punch -Type: 210 Super 13 -Pressure force: 65 ton. -Punching: projection 370 mm -scissors -to cut -Notch pipes -Tripping: electrical -Foot switc...
BROBO 66 TON
66 Ton Brobo Ironworker, Dual Cylinder
GEKA BENDICROP 60SD
SHEAR, PUNCH, NOTCH, BEND
SPARTAN IW66D
66 Ton Spartan IW66D Ironworker, 2012- Dual Cylinder
SUNRISE PM-60LT
Capacity: 66 Ton / 65,000 PSI Tensile Strength Throat: 20” Punch Capacity: 7/8” x 11/16” up to 2” x 5/16” (diameter x thickness) Channel Flange Punch Height: 7” Maximum Stroke: 4” Strokes / M...
METAL MUNCHER MM70
Metal Muncher MM-70, Mild Steel 60,000 PSI Tensile, Depth of Throat 9", Open Height 14", Stroke Length 7", Ram Shaft Diameter 13", Strokes Per Min 40 @ 1/2", Platen Table Size 11"D X 48"W, Work Sta...
EDWARDS 75 TON
75 Ton New Edwards Ironworker, 2021 - W/ Powerlink System
MUBEA KLH 700/760
77 Ton Mubea KLH 700/760 Punchpress, 1997
GEKA HYDRACROP 80
Hydraulic Operation with Foot Pedal Trip Contorls, Flat / Bar / Angle / and Square Shear Stations, Notcher Station, Punch Station with Deep Throat, In-Base Hydraulic System, Additional Punches and ...
MUBEA HIW-750/510
82 Ton 20" Throat Mubea HIW 750/510 IRONWORKER
SCOTCHAN FI8510-20M
Scotchman Model FI8510-20M 480 Volt 3Ph 85 Ton Ironworker New 2006 W/Dies (#17125)
PEDDINGHAUS 210 SUPER 16
ITEM #: BL9767 PEDDIGHAUS 210 SUPER 16 88TON IRONWORKER EQUIPPED WITH: BAR SHEAR: 1.75" SQUARE, 1.875" ROUND ANGLE SHEAR: 6" X 1/2" 5/8" NOTCHING THICKNESS SHEAR FLAT MAX 10" X 1/2", 6" ...
PEDDINGHAUS 88/120
5" x 5" x 1/2" Peddinghaus #88/120, 88 ton, 20" shear with hydraulic holddown, 1993
KAAST MACHINE TOOLS PS 85 DP
KAAST PS 85 DP Ironworker with 5 work stations rated at 90 Tons KAAST Machine Tools is proud to offer one of the most extensive line-ups of high-quality machine tools in the industry. From mills an...
PIRANHA P-90
90 Ton Hydraulic Ironworker with Complete Punching Attachment w/ Split Dovetail Mounting, Automatic Hold Down on the Punch Stripper and on Angle Plate and Bar Shear.
GEKA BENDICROP 85SD
MARVEL MSIW93D
Like new machine. No longer needed for our operation. Includes punches.
EDWARDS 100
100 Ton Ironworker with Four Available Workstations (Punch, Flat Bar Shear, Angle Shear, 1 Open for Optional Attachments), High Capacity Angle Shear and Electrical Stroke Control
EDWARDS 100 TON DELUXE
100 Ton New Edwards Deluxe Iron Worker, 2021- W/Powerlink System, 5 Loaded Workstations
GEKA 110SD
110 Ton Geka Hydracrop 110/SD Hydraulic Ironworker (2006) 100 Ton, Hydraulic Operation, 6" x 6" x 5/8" Capacity Specifications and Equipment Flatbar (minimal deformation): 24" x 5/...
MUBEA HIW-1000
110 Ton X 6” X 6” X 1/2” Dual Operator Ironworker with 2 Independent Cylinders, 2 Foot Pedal Controls, 5 Workstations, Punch Station, Notching Station, Angle Shear Station, Round / Square Bar Stati...
MUBEA HIW-1000/610
USED MUBEA 110 TON DUAL OPERATOR HYDRAULIC IRONWORKER MODEL HIW 1000/610, Year 2000, Stock# 10834
EDWARDS 120 TON
120 Ton New Edwards Ironworker W/ PowerLink System, 2021
EDWARDS 120 TON
EDWARDS 120 TON IRONWORKER EDWARDS 120 TON IRONWORKER
GEKA 110/AD
The blades have been turned to a new edge or sharpened and it appears to be in good condition
GEKA HYDRACROP 110
120 Ton Geka Hydracrop 110 Hydraulic Ironworker
GEKA HYDRACROP 110PD
Geka Hydracrop 110/PD Triple Punch Hydraulic Ironworker w/ CNC Positioner
GEKEA HYDRACROP 110PD
121 Ton Geka Hydracrop 110PG , 2015 automated back stop
GEKA 110SD
121 Ton Geka Hydracrop110SD Ironworker, 2010 - NC Punching Station, With Auto Shearing