8
Spindle holder: MK 4 Max. Drilling capacity: 40 mm steel Feed in 3 speeds, clockwise and anticlockwise rotation, 2 motor speeds Infinitely variable speed adjustment with tachometer thread cutting device
Jic2eej
2
Number of drilling agregates 4 Stk.
Automatic Fitting-press in nein ja/nein
Pot volume drill nein ja/nein
Qbkt7
7
pillar drilling machine make GILLARDON type R 30 VE
Machine # 0123213 Year of construction Dec./1976
Special machine for machining flanges or rings on the outer rim
technical data:
Drilling capacity 40 / 50 mm
tapping capacity M 42 / M 60
spindle admission MK 4
spindle stroke 240 mm
Spindle speed 60 - 1600 rpm.
Column diameter 160 mm
height adjustment 680 mm
drive power 1,1 / 1,6 kW
with
- pneumatic additional spindle sleeve stroke
- motorized rotating vertical chuck positioned under the spindle...
8
Offer no. 02244
Technical data:
- Drilling capacity in steel ST 60 30 mm
- Drilling spindle holder MK 3
- drilling spindle stroke 160 mm
Xqy8f3pc
- drilling spindle speed 100 - 2400 rpm
- right - left rotation
- throat 310 mm
- max. distance table - drilling spindle 760 mm
- table with 2 T-slots 530 x 340 mm
- Height adjustable via toothed rack with hand crank
- Drilling unit height adjustable
- Drive 400 V / 0,7 / 1,3 kW
- Space requirement approx. W 530 x H 1800 x D 650 mm
- wei...
2
Drilling capacity max.: 28 mm
Thread cutting max.: M12
Drill chuck: 1 - 13 mm / B 16
Be0oia0s
Morse taper: MK 3
Spindle speed: (12) 75 - 3200 rpm
throat depth: 250 mm
distance spindle / table max.: 810 mm
distance spindle / base plate: 1210 mm
quill stroke: 130 mm
column diameter: 100 mm
working surface base plate: 325 x 330 mm
table size / T-slot size: 375 x 375 mm / 14 mm
Motor output power S1 100%: 0,85 / 1,1 kW (400 V)
Motor input power S 6 40%: 1,1 / 1,5 KW (400 V)
Machine dimensions (W x D...
6
New column drilling machines Z5030VF to Z5050VF
Unzzgswc
Drilling capacity from 30 to 50mm
Thread cutting device
electro-magnetic feed clutches
drilling and milling machines
High-speed radial drilling machines
Vices
tenical data see pdf- document
min. Speed: 55 1 / min max. Speed: 5000 1 / min Maximum feed: 2800mm / min Tool holder: MK4 Quill stroke: 180 mm Thread capacity: M32 Maximum drill bit diameter (ST60): 32mm coolant pump New control system including operating instructions Drilling depth, speed and feed rate can be programmed via the touch panel Weight: approx. 830 kg
3qx7mauv
4
Column drilling machine
Make: MAXION
Prli0i
Model: UNIMAX 3 AVG
Condition: New machine
Spindle speed (infinitely variable):
Range A 80 - 1.440 rpm
range B 180 - 3.200 rpm
normal drilling capacity: 30 mm
standard equipped with:
- infinitely variable drill feed
- infinitely variable speed control
- digital display for speed, feed and
and drilling depth
- automatic tool ejector
- operating instructions
with the following options:
- Tapping device
1
pillar drilling machine make WEBO type GRADUA 50
Machine # 043/116-1 Year of construction 1980
technical data:
max. drilling capacity steel 50 mm
Jssbz3
spindle stroke 240 mm
throat 390 mm
8 spindle speeds 80-1800 rpm.
3 aut. feeds 0,03-0,4 mm/rev.
spindle holder MK 4
table size 400 x 550 mm
dimensions 1200 x 730 x 2600 mm
used, in good condition
11
CODE 2215 NEW MICRON DRILL PRESS
TECHNICAL FEATURES
Year of construction: 2021
Serial number: 2107114
Machine conforms to CE regulations
Drilling: Ø 25 mm with retractable table and vice
Table dimensions: 350 x 270 mm
Phases: 3
Voltage: 400 V
Power: 0.5 / 1 Kw
Machine dimensions: 405 x 780 x 1720 mm
Bzu8scn8ir
Machine dimensions on pallet (for transport): 1200 x 800 x 1860 mm
Weight: 182 kg
ENGINE
Type: YD90L-8/4
Power: 0.5 / 1.0 Kw
Voltage: 400 V
715/1430 r/min
50 Hz
CE
7
Gear drilling machine MK 4 with autom. Feed and thread cutting device Gear stage with speed 315 and 630 is out of operation, otherwise perfect function Speed range from 80 - 2800 rpm Throat 300 mm Table 380 x 500 mm Quill stroke 160 mm
Bolw37zzqy
4
Column drilling machine make ALZMETALL type AB 50 HST
Qjd72iwt
machine # 340 year of construction 1982 in box-type design
technical data:
drilling capacity in steel 50 mm
drilling capacity in cast iron 65 mm
Drilling capacity in steel 65 mm
Thread cutting in ST 60 M 60
Thread cutting in cast iron M 72
Spindle holder MK 5
throat 400 mm
table size 700 x 520 mm
quill stroke 240 mm
5 aut. feeds 0,1-0,4 mm/rev.
infinitely variable speeds 40-1600 rpm.
drive power 3,0 / 5,0 kW
total weight 1400 kg
with...
1
Column drilling machine Fabr. BGU
technical data:
max. drilling capacity 30 mm
tool holder MK 3
throat 280 mm
quill stroke 110 mm
infinitely variable speeds 110 - 1450 rpm.
table size 400 x 430 mm
drive power 1,1 kW
dimensions 500 x 800 x 1750 mm
D9nxgdt
1
Column drilling machine make ALZMETALL type AB 35 S
Machine. # 963 Year of construction 1970
technical data:
Drilling capacity in steel 32 m
drilling capacity in cast iron 40 mm
Drilling capacity in steel 45 mm
Morse taper MK 4
throat 300 mm
column diameter 145 mm
stepless spindle speed 55 - 1450 rpm.
quill stroke 160 mm
3 automatic feeds 0,1; 0,2; 0,3 mm/rev.
table size 375 x 500 mm
drive power 1,4/ 2,2 kW
Slzyu7xl
power supply 380 V, 50 Hz
dimensions L x W x H approx. 600 x 800 x 2000 mm
used
Door band drill Pressta Eisele / Rinaldi Multifoir
Qi2d8izv
4
Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines.
Short introduction:
• Single and multi hinge boring and inserter for high capacity
• Massive and robust drilling units
• Inserting die made of steel for a long life time use
Riuxtxo
• Solid wood drilling with standard 1,5 kW motor
• Safety-control with metal-detector (option...
4
CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines.
0xsaq2tz
Short introduction:
• CNC controlled hinge boring and inserter for high capacity
• Flexibility through the CNC control
• Massive and robust drilling units
• Inserting die made of steel for a long life time use
• Solid wood drilling with standard 1...
4
Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines.
Short introduction:
• Single and multi hinge boring and inserter for high capacity
• Massive and robust drilling units
• Inserting die made of steel for a long life time use
Ibj0nlx
• Solid wood drilling with standard 1,5 kW motor
• Safety-control with metal-detector (option...
3
Used machine
Year of manufacture 1992
Condition: well maintained
Drilling and pressing machine for all
variants of furniture fittings
Tkxlwlyd
hole line drilling machine in system 32
Hole line drilling head with 7 spindles with patented
integrated pin
4-spindle drilling head for hinges system Hettich
Quick change system
pneumatic drilling stroke
Availability: short term
location: Hochheim
8
Blue Max 8 with 8-spindle drilling head
Aluminum supporting table
Stop system with 3 fixed and 2 tilting stops
Integrated row of holes following stops
Universal die for pressing in Intermat, Ecomat, Varimat and Selekta 4 hinges
footswitch
B7sugpi9o7
All Blue Max 8 versions are generally equipped with a chip extraction
Engine power 1.6kW (2.1PS)
more photos o out website
6
UniPress grass for pot hinge drilling and injection is in good condition
Weight 95 kg
Year of manufacture approx. 1993
Attacks left and right
Mobile base operating instructions the machine is in good condition, ready to use.
Location: 54634 Bitburg's stock changes, errors, prior sale reserved.
88gx07b2c
7
Vertical drilling and inserting machine for pot bands
Engine 1,1 kW
Drill head with 4 spindle
Long fence with auxiliary stops
Vs0u2u
Location: From warehouse 54634 Bitburg
- free on truck -
11
In this offer you acquire a used colour production system "Xerox Versant 2100 Press".
Item for sale:
1 x Xerox Versant 2100 Press with the following equipment:
incl. Fiery EX2100
incl. Paperdeck A-CF03
incl. Finisher LCS-1 + A-GW01
Meter readings:
Total: Approx. 6,113,208 pages
Colour: Approx. 4,849,197 pages
Black: Approx. 1,264,011 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing).
The machine has been test...
1
pressure 100 t
stroke 380 mm
table: 1740 x 996 mm m
daylight - vertical 600 mm
Working width 1100 mm
total power requirement 2,2 kW
weight of the machine ca. 1,6 t
Gvufe0
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
7
HGH® EDM Drill starting hole drilling machine, EDM drilling hole machine
Type EDM-Drill
Type JM25 D
Year 12/2003
serial no. 0128853
with coolant system
The machine is sold untested because the technical knowledge to operate the machine is not available. The machine can be inspected on site and tested under power.
B8heb2299t
6
pressure 400 t
distance between columns 1100 mm
stroke 250 mm
no. of strokes 25 - 75 /min
distance table/ram, max. stroke up, adjustment up 900 mm
table surface area 1100 x 965 mm
capacity of ejector in table 30 t
ejector stroke of ejector in table 80 mm
capacity of ejector in ram 3 t
stroke of ejector in ram 60 / 70 mm
ram surface 980 x 800 mm
column travel -side 800 mm
B2yiufquam
ram adjustment 20 mm
power capacity 80,0 + 5,5 kW
weight 47,0 t
Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m
weight of swit...
5
Laenge: About 2430 mm
Width: About 1520 mm
Heithrange: About 540 mm
Hpxmute
50 mm
roll diameter 148 mm
3ojke8o
revolutions per minute 13,6/27,2 U/min
total power requirement 1/1,4 kW
weight of the machine ca. 420 kg
dimensions of the machine ca. 800x920x1450 mm
10
In this offer you acquire a used colour production system "Xerox Versant 80 Press".
Item for sale:
1 x Xerox ersant 80 Press with the following equipment:
incl. Fiery EX 80 (PRO80-30)
incl. Paperdeck LSC-1 + ZYC-1
incl. Finisher A-CF03
Meter readings:
Total: Approx. 3,807,483 pages
Colour: Approx. 1,878,830 pages
Black: Approx. 1,928,653 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing).
The machine has been ...
1
pressure 50 t
stroke 250 mm
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
Beojfhitbb
weight of the machine ca. 1,7 t
13
Chain conveyor before hot press - 5.50 m
Belt conveyor after hot press - 4.80m
B8ejb3lesi
Working material with - 1.40 m
Working material length - 4.50 m
4
⢠Minimal footprint
Bjfhulirbn
⢠Height continuously adjustable
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
6
Dimensions:
L3bigh2g
2750x1700mm
T-nut plate: 2440x1520x230mm
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
adjustments 120 mm
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1,2 x 0,8 x 1,75 mm
The PB 50-3 H is a hydraulic profile bending machine: we produce
thisprofilebender in Europe and deliver it directly from our stock.
Benmpar7my
This hydraulic profile bending machine has a shaft diameter of 50 mm and 3
driven rolls. It is easy to switch between working with two or three driven
rolls ...
In this offer you acquire a used colour production system "Xerox Versant 180 Press ".
Item for sale:
1 x Xerox Versant 180 Press with the following equipment:
incl. Finisher A-FN13
incl. Finisher A-GW05
incl. Fiery EX 180(NX Pro-01)
incl. Paperdeck A-GF03
Counter readings:
Total: Approx. 966,348 pages
Colour: Approx. 361,444 pages
Black: Approx. 604,904 pages
Consumables:
B0978olads
Drum Unit BK: 88%
Drum Unit C: 90%
Drum Unit M: 88%
Drum Unit Y: 89%
Condition:
This ...
6
Spindelpresse - Spindle Press Spindle Press Krause
Jiciqnz
Serial-No. KgS
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
11
WSK 561 hot stamping press, die cutting machine
P932r
The device is in perfect condition, ready to work.
It is a machine from the popular producer WSK Intermarking Fritz Wagner, produced in Germany.
Description
The WSK 561 hot stampingmachine is an automatic press for gilding, stamping and die-cutting of paper and plastics. The device is useful in every advertising agency and printing house.
The high pressure force allows to carry out any demanding work,
Automatically started machine cycle, pow...
3
pressure 400 t
distance between columns 1060 mm
stroke 450 mm
no. of strokes 15 - 30 /min
distance table/ram, max. stroke up, adjustment up 1160 mm
table surface area 1000 x 700 mm
capacity of ejector in table 2 x 16 t
ejector stroke of ejector in table 125 mm
Die cushion pressure in table 120 t
Die cushion stroke in table 2 mm
capacity of ejector in ram 2 x 4 t
stroke of ejector in ram 100 mm
ram surface 1000 x 700 mm
B2yjjufjcu
column travel -side 630 mm
power capacity 55,0 kW
weight 50,0 t
Di...
9
Dimensions: 2740x1700x220mm
Beya8omnph
pressure 16 t
plate thickness 4 mm
Nulov
no. of strokes 70 Hub/min
stroke speeds 1,7 sec.
working feed 2/9.8 mm/sec
return speed 20 mm/sec
piston stroke 70 mm
arm length: 160 mm
total power requirement 2,2 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,8 x 0,45 x 1,43 m
In this offer you acquire a used colour production system "Minolta Bizhub Press C1070".
Item for sale:
1 x Minolta Bizhub Press C 1070 with the following equipment:
Bw3wyiag
incl. Booklet Finisher FS-612
incl. Relay Unit RU-516
incl. Paperdeck LU-202
incl. Fiery E200-02
Counter readings:
Total: Approx. 558,434 pages
Colour: Approx. 532,384 pages
Black: Approx. 26,050 pages
Consumables:
Drum Unit BK: 41%
Drum Unit C: 76%
Drum Unit M: 76%
Drum Unit Y: 76%
Condition:
...
11
Good working condition
Manufactured in Romania
YOM: 1986
Mechanical
Pressing nominal force: 10,0 MN
Number of strokes/min: 20
Ram stroke: 310mm
Brg0g2i9k7
Work surface: 2290mm x 1600mm
Total dimensions: 7880mm (6880 from the ground) x 4150mm x 2350mm
Total weight: 108009kg
7
Set of 2 Punching machines + 1 drilling machine
Machine 1:
- Manufacturer: Maschinenfabrik Karl Burkard
- Model: 6 TF
- Produced in: 1971
- Ram stroke: 2/40 mm
- Ram pressure: 6000 kg
- Strokes: 220/min
- Power: 0,7 PS
- NC driven by ANC 240 autotron
Qaqqt
Machine 2:
- Manufacturer: mabu-pressen
- Model: 6 TFK/ S
- Produced in: 1987
- Stroke adjustment: 5-40 mm
- Pressing force: 60 kN
- Strokes: 220/min
- Power: 0,55 kW
- NC driven by ANC 240 autotron
Machine 3:
- NC slope drilling machine
...
10
Briquette diameter: 75 mm
By0wnmx87p
Capacity: 900 - 1200 kg/h
Electric motor: 55 kW
7
Book press with joint forming ODM Smasher
Very good condition, the machine is ready to work.
ODM production, USA.
Technical data:
max format: 300 mm x 350 mm x 100 mm
Weight 400KG
230V power supply.
Smooth temperature control.
Hydraulic press drive.
B33r99bq7j
Two-handed cycle triggering.
pressure 10 t
plate thickness 4 mm
no. of strokes 26,6 Hub/min
stroke speeds 1,7 sec.
total power requirement 2,2 kW
weight of the machine ca. 190 kg
Nlmbf
dimensions of the machine ca. 0,68 x 0,44 x 1,214 m
In this offer you acquire a used colour production system "Xerox Rialto 900 Inkjet Press ".
The Rialto 900 closes the gap between high-speed inkjet production printing systems and cut sheet systems with toner technology. It combines the speed and economical cost per page of inkjet technology with high print quality and low investment costs.
Item for sale:
1 x Xerox Rialto 900 Inkjet Press with the following equipment:
incl. Double Stacker
incl. Cutter
New price: 750.000€
From 2017
Meter ...
3
Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014.
Lydy8clb
Unique Cold Hydraulic Presses Specially Designed for Engineered Wood Flooring (Parquet) Production
Technical parameters of our standard MK2 models:
- Max gluing widths - 300 mm (Up to 500 mm upon order)
- Max gluing length - 2560 mm to 3840 mm (Unlimited upon order)
- Max gluing height - 800 mm
- Working height - From 800 to 850 mm
- No of pressing cylinders (total) - From 16 to 24 pcs (Unlimited upon order)
- No of independent pressing cycles - From 4 to 12 cycles (unlimited upon order)
- Pit...
9
Good working condition
Brgz07z8jv
Manufactured in Romania
YOM: 1992
Hydraulic
Ram stroke: 700mm
Nominal working pressure: 320 bar
Working direction: Up to Down
Work surface: 2000mm x 2400mm
Fast approach speed: 200mm/sec
Working speed: max.50mm/sec
Return speed: 250mm/sec
Maximum height from the ground: 8000mm
Weight: 226,000kg