Worldrigs ID: WR372

Model : T650W Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :

Chicago Pneumatic T650W Drill Rig
425 CFM / 250 PSI Leroi 256 SD Air Compressor
Diesel Deck Engine
Pipe Rack
Mounted on a Truck
Diesel Engine

Location : USA

Worldrigs ID: WR762
Model : RD20 III Drill Rig
Manufacturer : Atlas Copco
Year : 2007
Condition : Used

Description :

2007 Atlas Copco RD20 Range III Drill Rig & Pipe Handling System
Hours 27,319+
Heavy�duty Derrick and Top head Drive pullback of 120,000 lb
51 ft. 7" in. clearance - plenty of room for 30 ft. drill pipe
8,000 ft�lb. Spur gear power head
Cummins QSK�19C Diesel Deck Engine - rated 755�hp
IR HR2.5 1,250 cfm / 350 psi Air Compressor over/under Air End
Mounted on a CCC (Crane Carrier Company) Truck
Caterpillar C13 Diesel Engine - rated 380 HP
Mileage  32,531+
Note: Package Includes:
2014 Foremost Pipe Handler 4000 Series (hydraulic pipe handling system -
hands free) on a 2 axle Trailer
The engine, compressor and hydraulic pumps are mounted on a floating
power�pack

Location : USA

Worldrigs ID: WR628
Model : T64HB Drill Rig
Manufacturer : Schramm
Year : 1969
Condition : Used

Description :

1969 Schramm T64 Drill Rig
Detroit 8V71 diesel deck engine
425 cfm / 250 psi air compressor
300 ft of 4-½inches x 20ft drill pipe
6inches hammer w/ 6inches bit
8inches hammer w/ 8inches bit
2 new motors on head
Last had it running in mid-January 2019
Mounted on a newer 1995 Ford 9000 Truck
Cummins N14 diesel engine
9-speed transmission
2250 tires (estimated 85% good)

Location : USA

Worldrigs ID: WR197

Model : Heli-Rig 700 HP Package
Manufacturer : Generic
Condition : Used

Description :

Mid-Continent U-36 Ae Diesel Electric @ 700 HP, S/D Drawworks,
Lebus Grooved F/1-1/8" Line, Air Drillers Console, 22" Hydromatic Brake,
Hydraulic Tank Pump P/B @ 2 HP Electric Motor, P/B Ge 752 Traction Motor,
with Blower, @ 1000 HP,All Mounted Covered Skid with Fluorescent Lights,
Ruffneck Heater, Master Skidded

Mast :
Parco 131' H x 17'8" W Cantilever Mast, 360,000 lbs Sheaves, Pin-Type, Crown Block,
(5) 36" Sheaves, 46" Fastline Sheave, 1-1/8" Line, 4" Standpipe, Crown Safety Platform
Racking Board, Tong Counterweights, Ladder, Derrick, Climber, Mast Stand,
Fluorescent Lights.

Sub :
Parco 22' H x 25' W X 35' L Self-Elevating Substructure, Self-Skidded, Rotary Beams,
Stairs, Safety Rails, Deadline Anchor, Skidded with V-Door, 42" H x 5' W x 32' L,
2- Section Catwalk with Steel Deck

Top Drillers House :
10' H x 8' W x 20' L Rd Top Doghouse with 3' l Porch, Knowledge Box, Lockers,
Lights, Bench & Cabinet Storage, Remote Closing Unit, Skidded

Scr House:
Baylor Model Se-33-Ba-301, 3-Bay Scr Drive System, S/N: 1001-61054, 600 Vac,
60hz Input, Multiple Controlled Dc Outputs At 0-750 Vdc, Allen Bradley
Switch Gear & Baylor Instrumentation, (2) Marcus Transformers, (1) 600-400 Volts
(1) 460-208 Volts, Mtd In 10' H x 10'6" W x 20'l House, Lennox T-Class Heat/Air Unit,
Emergency Lights, Skidded.

Generators :
(1) Caterpillar 600kw Generator, P/B CAT 3412 Diesel Engine (S/N 81z0127),
Electric Start, Radiator, Gauges,
(1) Bbc 715 700kw Generator Set, P/B Cat 3412 880hp Diesel Engine
S/N 38s2v356, Air Start, Radiator, Gauges,
Both Mounted in a Skidded 10' W x 36' L Generator House, Fluorescent
Lights, Day Tank,

Location : USA

Worldrigs ID: WR769
Model : Drill Rig
Manufacturer : Gus Pech
Year : 2008
Condition : Used

Description :

2008 Gus Pech Drill Rig
5,000+ Hours / Miles on Freightliner Truck
3,500+ Hours Drill
Overhauled at Gus Pech Factory in 2017
Sullair 700 cfm / 200 psi Air Compressor
7x10 Centerline Mud Pump
Tilt Power Head
450 hp Mercedes Diesel Engine
set up for Water Wells
estimated rig weighs 48660 lbs, 8ft 6” W, 13ft H, 37ft L

Location : North America

Worldrigs ID: WR691
Model : 1500 drill rig
Manufacturer : Gardner Denver
Condition : Used

Description :

Gardner Denver 1500 drill rig
5x6 mud pump
kelly drive recentlly rebuilt
Mounted on a twin axle carrier
Diesel engine
Note: no air compressor on board

Location : USA

Worldrigs ID: WR886
Description :

2012 Schramm TXD 200 Drill Rig
serial number J135-0216, trailer VIN#: 1K9AD40C1C3268138.
Detroit DDC/MTU 12V-2000 Diesel Deck Engine

Tilt Top Head Drive:
Heavy duty, single reduction gearbox with 4 two-speed disc valve type 
hydraulic motors
Variable rotation speed via HRC control
Torque: 0-90 RPM @ 17,750 ft-lbs (24,066 N-m)
0-180 RPM @ 7,670 ft-lbs (10,399 N-m)
Rotation Speed: 0 - 180 RPM · 

Feed System:
50 ft (15.24 M) head travel
200,000 lbf (890 kN) hoist capacity
100 fpm (30.5 m/min) hoist speed
32,000 lbf (142 kN) pulldown
200 fpm (61 m/min) pulldown speed

Drill Table:
Table Opening : 30" inches (768 mm) diameter with table retracted
Hydraulically retractable slip box

Drill Pipe And Casing:
Range III tubular 30 inch capability

Winch:
Planetary design with spring applied hydraulic release brake
9,600 lbf (42.7 kN) bare drum line pull
150 fpm (46 m/min) bare drum line speed
Hydraulic jib boom swing and extend
Auxiliary winch available
The drills have low wear on the cables, bearing and pivot points as well 
as the Control panel
All are in excellent/very good condition during last inspection
LoadSafe pipe handling systems (hands free pipe loading system)
mounted on Trailers

Package available  each of the following:
Generator House with 2 Maraathon Model 431CSL6202-B211 60 HZ Phase 1 
120/240V 122 KW 504 AMO or 3 Phase 277/480 155 KW 233 AMP poered by 
Perkins 6.6 L 1106 IR 2340 Shop air ,Hyd lift with Honda GX392,4000 Gallon 
feul tank and 4 lights on roof.
Weatherford T425 Triplex Mud pump powered by John Deere 6135 diesel engine 
(Tier IV) - rated 500 HP, 6.50 Plunger 900 PSI, MCM 4x5x14 Super Charge 
Centrifugal pump with soap mixing tanks in back
750 BBL Water tank with hydraulic lift dog house
Crew changing house
Crew House 
8000 ft of drill pipe (4" DP New 30ft 6" NC40)
(4) 6-1/2” Drill collars
Every unit is clean & straight and it is a very nice package in excellent/very 
good condition after inspections in 2020

Location : USA

Worldrigs ID: WR775
Model : SDC500-29P Drill Rig
Manufacturer : Sonic
Condition : Used

Description :

Sonic SDC500-29P Drill Rig
80k Diedrich head
28ft stroke, 37ft 8" overall, 24k pullback 16k pull down
12k 5/8" x 222ft nonrotating winch
4"-13" nominal clamping break out table
Hydrostatic circuit 4500PSI
pilot control
micro feed
float
high/low feed, 120gal hydraulic tank
Mounted on a 2004 International 7600 6x4 Truck
Cummins ISM 320V upgraded ECM - rated 385hp
A45/1450 ft torque
Eaton Fuller 13 speed transmission
Hendrickson 38k rear axles
11R22.5 tires
FMC bean pump
3L6 Moyno
Head #A0001 Rebuilt 3/22/12, 11/17/16 (upgraded roller bearings)
9/11 complete engine overhaul (95k chasssis)
Completely rebuilt table (all new) 11/17/16
Rebuilt bean pump (FMC w1122BCD) 2/11/19
New main Hydraulic pumps 3/27/17
New cam rollers for head cradle 10/11/17
Odometer 16,188m 2,466Hrs

Location : USA

Worldrigs ID: WR546

Model : D40K Drill Rig
Manufacturer : Driltech
Condition : Used

Description :

Driltech D40K Drill Rig
50,000 lbs of pullback
high torque head
No carousels (removed for large diameter Well drilling)
dual winches 6000k single line
18000K single line hydraulic Denison P7 main pump - replaced early p-5
All pumps where rebuilt or replaced in 2015 including main gearbox rebuild
Replaced / upgraded to Mercedes tier 4 (I) 550hp diesel deck motor
900 CFM / 300 PSI air compressor
has a mud line and a true 3" mud swivel added to it so it's "mud ready"
New in 2015 radiator/engine cooler rated at 450hp Additional hydraulic cooler added
Mounted on 2012KW tier 4 435hp Paccar heavy spec truck
dual steering and full locking rears
Heavy duty engine Brake
Rig needs a few new hydraulic hoses and new paint job
Note: this machine is 100% California CARB compliant

Location : USA
 

Worldrigs ID: WR551

Model : TH60 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1998
Condition : Used

Description :

1998 Ingersoll-Rand T3W Drill Rig
CAT 3406 Diesel Deck Engine
IR HR2 900 cfm / 350 psi Air Compressor
Hammer Lubricator
Bean water injection pump (4 piston)
7885 hours
18,000 LBS Winch
400' ft of (4-1/2” x 20’ 2-7/8IF) drill pipe & basic tooling included
Pipe Rack
Hydraulic leveling jacks
Mounted on 1998 International 2600 Truck
VIN# 1HTGLATT8XH631062
33,148 miles
Caterpillar C-10 diesel engine - rated 350 HP
Jake brakes
10 Speed Spicer Transmission
Power divider
Tires (90%+ Very Good Condition)

Location : USA

Worldrigs ID: WR367

Model : 658 Franks W O Drill Rig
Manufacturer : Generic
Condition : Used

Description :

658 Franks W O Drill Rig
4-axle carrier
Detroit 8V-71 Diesel Engine
Allison 4460 Automatic Transmission
96-foot 3-Legged Franks Derrick
7/8" drill line
Dual drum

Location : USA

Worldrigs ID: WR861
Description :

Schramm T130 Drill Rig
Diesel Deck Engine
Mounted on a CCC Truck
Diesel Engine

Included as a package:
4-1/2" Bottle Neck X Hole Drill Pipe
6" Collars = 90 ft
All Subs needed to drill
Spare Motor
Spare Parts : Top Drive (Rebuilt no hours), New Spindle,
Bearings for top drive, Chive Crown
Pipe Racks with Catwalk (30 ft L X 5 ft W X 3-1/2 ft T)

Location : USA

Worldrigs ID: WR697
Model : Rotadrill T64HB Drill Rig
Manufacturer : Schramm
Year : 1974
Condition : Used

Description :

Schramm Rotadrill T64HB Drill Rig
Rebuilt - Detroit Diesel Deck Engine
No Air Compressor on deck
Tool Carrying Cabinet
Reinforced Mast
Heavy Winch line
3 Outriggers
Hydraulic Pull down & Pull Back
Multiple speed top head motor
Hydraulic Cooler
Autofeed
Mounted on a 1974 International RO Truck
Newer 6 Cylinder Engine
Multi-Speed Transmission

Location : USA

Worldrigs ID: WR694
Model : 650 S/S Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :

Chicago-Pneumatic Model 650 S/S Drill Rig
No Engine currently on deck, but 2 spare Caterpillar 3406 diesel
engines are included
- 1 engine is said to have been rebuilt but we have not tested
- 2nd engine has a hole in block but will also be given with drill so
  you may salvage other parts from it as needed
750 CFM / 125 PSI C05 Air Compressor
Dynex main pump, Dynex Head motor
Gearmatic Hydraulic winch
27,500 lb. pullback capability
DTH Hammer oiler (lubricator included but needs re-installed)
4-hole Funk Box (hydraulic pump drive)
6-pod drill pipe carousel (needs re-assembled and re-installed)
3 Hydraulic jacks
3 pieces of 25 ft. drill pipe included
Mounted on a 1978 CCC (Crane Carrier Company) truck
powered by Caterpillar 3208 diesel engine - showing only 5136 miles on
odometer
Carrier hood and fender need re-installed, comes with spare on-road fuel tank

Location : USA

Worldrigs ID: WR733
Model : DR12 Drill Rig
Manufacturer : Foremost Barber
Year : 2001
Condition : Used

Description :

2001 Foremost DR12 PTO Drill Rig
Atlas Copco XRV9-PTO 900 CFM Air Compressor
Mounted on a Sterling LT9500 Truck
Cummins ISX 15 Diesel Engine
500 ft of (3-1/2” OS x 2-3/8 ft IF) Drill Pipe
Includes drilling tools and equipment:
stabilizer with tricone
2 downhole hammers
1 cyclone with discharge hose
jaw 6-8-10 inch
drill pipe wrench set
1 hydrofrac balloon
oxygen / acetylene cutting assembly
Miller welder / generator

Location : North America

Worldrigs ID: WR876
Description :

1988 Ingersoll-Rand ECM 350 Drill
Mounted on crawler metal tracks
It was an operating unit when it was park
Note: Can include a 1997 Ingersoll-Rand 750 Air Compressor with 1100 hours

Location : USA

Worldrigs ID: WR364
Specifications
Pull up : 88῾302 lb
Pull down : 44῾150 lb
Stroke : 28 ¼’
Drilling torque : 20῾650 ft-lb 0÷180 rpm
Coring torque : 3῾320 ft-lb @ max 800 rpm

Speed up/down : 2,3 ft/s
Service jib crane : 22῾075 lb
Mud pump : 7 1/2” X 7” duplex double acting
Centrifugal pump : 792 gal 42÷72 psi
Foam pump : 60 GPM 1210 psi

Double vice : 20 ½”
Make up and break out :59῾000 ft-lb
Stroke : 27 ½”

Diesel engine : 440 kW @ 1800 rpm
Drill pipe feeder : 3 ½”÷8”
Drilling : Direct circulation - coring
Dimensions : 8,20’x 42,65’x 13,94’ (h)
Weight : 101῾412 lb

Description
D40 Hydraulic Driling Rig
Truck mounted on Astra 8 x 4
Pull up 40 metric tons

- Truck Astra HD8 Model 84.44 (heavy duty) 8x4, Euro 5
- Mast Lattice Type for D.P. and D.C. 6mt long
Maximum static hook load : 40 metric ton (44 short ton)
Maximum pull down : 20 metric ton (22 short ton)
Top drive stroke : 8,6 m.

- Slant device that permit to drill from 0-45 degree with Hydraulic Stops 5 degree by 5
degree
- Automatic drill pipe and drill collar handling system Suitable to catch drill pipes and drill
collars diameters 2 â…œ” -8” with control valve for force regulation.
- Semi automatic Pipe Rack
- Pull up and down system composed by hydraulic block distributor with valves,
hydraulically controlled to action the main cylinder.

- Hydraulic power Tong
at double body, suitable to screw and unscrew DP, DC and CSG.suitable to catch D.P.
from 2 â…œ” to CSG max 20”, full opening passage 20.1/2”.( 520 mm).
Maximum make : up 6200 kgm
Maximum brake : out 8000 kgm

- Top drive
Standard Drilling
• Maximum torque 2.800 daNm at 50 RPM (20.282 ft/lb)
• Maximum torque 778 daNm at 180 RPM (5.633 ft/lb)
• RPM from 0 to 180

Coring Drilling
• Maximum torque 448 daNm at 362 RPM (3239 ft/lb)
• Maximum torque 202 daNm at 800 RPM (1460 ft/lb)
• RPM from 0 to 800
• Stroke 8,6 m ( 52,5 ft)
• Pull up 40 metric tons ( 44 short ton )
• Pull down 20 metric tons ( 22 short ton )
• Maximum speed up 1 m/sec
• Maximum speed down 1 m/sec

- Service jib crane
With telescopic arm extension minimum 1.5 mt
Maximum load capacity 10 tons
Running speed up and down 0,5 m/s
Rope ø 13 mm

- Crown block :
Complete of 2 sheaves for wire rope ø 13 mm mounted on bearings
- Travelling block :
For 10 Tons capacity and one sheave with dead line on travelling block
- N°4 Stabilizers
- Hydraulic power unit :
mounted on rig deck composed of :
Nr.1 Diesel engine industrial type, Deutz TCD 16.0 V08 Tier IV or TCD 2015 V08 4V
Tier III

- Sound proof hood (max 80 DB )
- Manifold for mud-air discharge max 80 Bar
- Hydraulic system :
composed of pumps and hydraulic motors, pipes and hoses, blocks, distributors,
valves, hydraulic cylinders and fitting.

- 7.1/2” X 7” Duplex double acting mud pump
Performance : @120 stroke/min
Max discharge : 2376 l/min with 37 BAR liner 7.1/2”
Max pressure : 70 BAR with 1252 l/min liners 5.1/2”
Power input : 217 Hp
Complete of Hydraulic motor joint for connection hydraulic motor to pump and flex
hoses

- Centrifugal Pump : 3000 litres , 3-5 Bar with hydraulic motor
- Foam pump : Triplex CAT mod. 6671 (or equivalent), driven by hydraulic motor,
- wireline winch :
Hydraulically operated ,
Max drum capability 2.000 Mt cable (9000 feet)
Suitable for wire ø ¼” max.
Max Speed 4mt/sec Max pull 1400 daNm

- Control panel, mounted on drill floor on rear position left side near to centre well,
- Electric system EEx-d
- Diesel Electric Generator Unit
- Tool box complete of standard tools for maintenance and positioned on main frame

Worldrigs ID: WR873
Description :

2009 Simco 2800 Drill Rig
Note: this is set up as a water well / geothermal drill & If you prefer a 2800 HSHT
set up for geotechnical drilling with auto hammer that is possible,
Rod 3" PDQ style 10 foot length
Ingersoll-Rand 375 CFM / 170 PSI Air Compressor
Centerline Monoplex Mud Pump
Rod box
FMC I0413C Water injection pump
Deutz Diesel Deck Engine (rated 70 HP)
2 Winches
Mounted on a 1994 Chevrolet Kodiak 4x4 truck
Caterpillar 3116 Diesel Engine

Location : USA

Worldrigs ID: WR886
Description :

2012 Schramm TXD 200 Drill Rig
serial number J135-0216, trailer VIN#: 1K9AD40C1C3268138.
Detroit DDC/MTU 12V-2000 Diesel Deck Engine

Tilt Top Head Drive:
Heavy duty, single reduction gearbox with 4 two-speed disc valve type 
hydraulic motors
Variable rotation speed via HRC control
Torque: 0-90 RPM @ 17,750 ft-lbs (24,066 N-m)
0-180 RPM @ 7,670 ft-lbs (10,399 N-m)
Rotation Speed: 0 - 180 RPM · 

Feed System:
50 ft (15.24 M) head travel
200,000 lbf (890 kN) hoist capacity
100 fpm (30.5 m/min) hoist speed
32,000 lbf (142 kN) pulldown
200 fpm (61 m/min) pulldown speed

Drill Table:
Table Opening : 30" inches (768 mm) diameter with table retracted
Hydraulically retractable slip box

Drill Pipe And Casing:
Range III tubular 30 inch capability

Winch:
Planetary design with spring applied hydraulic release brake
9,600 lbf (42.7 kN) bare drum line pull
150 fpm (46 m/min) bare drum line speed
Hydraulic jib boom swing and extend
Auxiliary winch available
The drills have low wear on the cables, bearing and pivot points as well 
as the Control panel
All are in excellent/very good condition during last inspection
LoadSafe pipe handling systems (hands free pipe loading system)
mounted on Trailers

Package available  each of the following:
Generator House with 2 Maraathon Model 431CSL6202-B211 60 HZ Phase 1 
120/240V 122 KW 504 AMO or 3 Phase 277/480 155 KW 233 AMP poered by 
Perkins 6.6 L 1106 IR 2340 Shop air ,Hyd lift with Honda GX392,4000 Gallon 
feul tank and 4 lights on roof.
Weatherford T425 Triplex Mud pump powered by John Deere 6135 diesel engine 
(Tier IV) - rated 500 HP, 6.50 Plunger 900 PSI, MCM 4x5x14 Super Charge 
Centrifugal pump with soap mixing tanks in back
750 BBL Water tank with hydraulic lift dog house
Crew changing house
Crew House 
8000 ft of drill pipe (4" DP New 30ft 6" NC40)
(4) 6-1/2” Drill collars
Every unit is clean & straight and it is a very nice package in excellent/very 
good condition after inspections in 2020

Location : USA

Worldrigs ID: WR209

Model : B61 HDX Drill Rig
Manufacturer : Mobile
Year : 1990
Condition : Used

Description :

1990 Mobile B61 HDX Drill Rig
Cummins 4bt 3.9 Diesel Engine @ 100 hp @ 2500 rpm
3l8 Pump
8,500 lbs Main Hoist
29' ft Tower
Mounted on a Ford F800 Truck
5 Speed Transmission
Ford 7.8 Diesel Engine @ 210 hp

Location : USA

 

Worldrigs ID: WR411
Description:

Worldrigs ID: WR790
Model : 500 Drill Rig
Manufacturer : Midway
Year : 1969
Condition : Used

Description :

1969 Midway 500 Drill Rig
Mounted on 1969 Peterbilt Truck
Leroi 100S Air Compressor
Gardner-Denver 5x6 Duplex Piston Mud Pump
New Rear Jacks
Recent Cummins Swap
Transfer case rebuilt in summer 2018
Comes with 200 ft. of 2-7/8” drill pipe
Currently working
Ready to drill

Location : USA

Worldrigs ID: WR881
Description :

2003 Schramm T450 Crawler Drill Rig
Serial Number : J102-B236
Sullair 900 CFM / 350 PSI Air Compressor (serial number: 004-005820) - rated
1800 RPM
Caterpillar 3406B diesel deck engine
Hour meter shows 10,360 hours
Proheat Engine Heater
Bean FMC 2 Cylinder water injection pump
6 Rod Carousel
Graco Hammer Oiler
Pullback: 30,000 lb (13,608 kg)
16.5 inch table opening
Crawler mounted (note: can be mounted on a 2005 Kenworth double frame truck)

Location : USA

Worldrigs ID: WR884
Description :

CME 55 Drill Rig
3 winches
6 Cylinder Ford gas engine on deck
6-ton boom for lifting augers
3 leveling jacks
Toolboxes on side
All new cables and new bushings up top
Mounted on a 1980 Ford Louisville truck
Caterpillar diesel engine

Tooling Included:
Qty. 2 – SPT Hammers
Qty. 2 – Split Spoons
Qty. 6 – New 8” OD / 4” ID Hollow Stem Augers (5 ft. lengths), with drive cap.
Qty. 12 – 12” OD / 43” ID Hollow Stem Augers (5 ft. lengths), with 3 bits and drive cap.
Qty. 8 – 6” OD / 3” ID Hollow Stem Augers (5 ft. lengths), with drive cap.
Qty. 21 – 6” solid augers, 5 ft. lengths.
Qty. 5 – 1-3/4” drill rods, 10 ft. lengths.
Qty. 9 – 1-3/4” drill rods, 5 ft. lengths.
Qty. 1 – 3-1/3” bit
Qty. 1 – 4” bit

Location : North America (Canada)

Worldrigs ID: WR805
Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2004
Condition : Used

Description :

2004 Ingersoll-Rand T3W Drill Rig
Engine Hours: 20,621
50 ft – 45,000lb static hook load capacity
hydraulic raise/lower mast
Atlas Topco top drive
Braden 23,000 lb winch
mud system (5” x 6” or 5.5” x 8” GD mud pump)
hydraulic set up to run two pumps or air compressor
hydraulic hoses are re-conditioned
rig derrick can be shortened if requested

Note: no deck engine or air compressor on board the drill
Mounted on International 5600i Truck
Cummins ISX 14.9L Engine
475 Adv horsepower
engine brake
Eaton Fuller 18 speed manual transmission
330” wheel base
8 X 6 20,000lb front axle
54,000lb rears

Location : North America

Worldrigs ID: WR833
Description :

2011 Atlas Copco RD20 Range III Drill Rig
Cummins KTAA19 (2019 Model) Diesel Deck Engine 800 Hours
IR HR2.5 1250 cfm / 350 psi Air Compressor
Mounted on CCC (Crane Carrier Company) Truck
Diesel Engine
Currently Working

Location : Middle East Region

Worldrigs ID: WR739
Model : T985HA Rotadrill Rig
Manufacturer : Schramm
Year : 1977
Condition : Used

Description :

1977 Schramm T985HA Rotadrill
Twin Diesel Deck Engine (8V-71)
Twin 400 CFM / 350 PSI Air Compressor (can combine)
Heavy Duty Mast
Autofeed
Auto Hydraulic Table Breakout Wrenches
Twin Hydraulic Main Pump
Twin Hydraulic Top head motors
Top head two speed rotation
Hydraulic adjustable Jib & Swing Jib
Water Injection Pump
Oil Injection Pump
Pull Down & Pull Up Rams
Mounted on a CCC (Crane Carrier Company) Truck 4x4
Diesel Engine
Complete Part & Service / Repair Manual

Location : USA

Worldrigs ID: WR872
Description :

PortaDrill 524 Drill Rig
5 Leveling Jacks
7-1/2" Retractable Rotary Table
26ft Kelly
3 Line Machine (Sand Line & Kelly)
2" Little Giant Swivel
Racking Board
Note: No Rod Included

Location : USA

Worldrigs ID: WR782
Manufacturer : Speedstar
Condition : As-Is

Description :

Speedstar Quick Drill Rig
Note: only good for Parts
Condition: As-Is
Mounted on Ford Truck

Location : USA

Worldrigs ID: WR494

Model : 650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :

Chicago-Pneumatic 650 Drill Rig
CP 450 CFM / 250 PSI Piston Compressor with 750/350(?)
Booster (air clutch needs newdiapragm)
Tiger Tierra Casing Driver
Carousel

Package Includes:
300’ ft of used drill pipe (some need new pins and boxes)
6” and 9” DTH Hammers
6” Tricone button bit

Spare Parts included; main pumps, top head motors, inner cooler, valves for
the compressor, new drive chain for the transfer case

Rig in working order, some oil leaks (packings need replaced).
Mounted on a 1973 International Paystar truck

Location : USA

Worldrigs ID: WR841
Description :

2003 Scrammm T660 Drill Rig Package
Mounted on 2003 Freightliner
10054 hours.
GHH compressor, 1000 CFM @ 350 PSI.
Rig has 685 top head drive gearbox and shocksub.

Compressor #1:
Sullair model 1150XHDTO
1150 CFM @ 350 PSI
Compressor had engine and compressor replaced in 2011, has about
2000 hours now mounted on 39ft tandem axle float with catwalks
and stair (with 2 compressors on it).

Compressor #2:
Sullair 1150XHDT
1150 CFM @ 350 PSI
10085 hours
Mounted on 39ft tandem axle float with catwalks and stair
(with 2 compressors on it)
Hurricane Booster
6T 276-41B 1000
Meter shows 352 hours
skid mounted
1800ft 4 1/2 x 25ft drill pipe, 2 7/8 IF
on 50ton triple axle trailer.
Hydraulic winch on trailer plugs into rig hydraulics
2 drill collars
15" stabilizer
8" and 12" Hammer

Location : USA

Worldrigs ID: WR367

Model : 658 Franks W O Drill Rig
Manufacturer : Generic
Condition : Used

Description :

658 Franks W O Drill Rig
4-axle carrier
Detroit 8V-71 Diesel Engine
Allison 4460 Automatic Transmission
96-foot 3-Legged Franks Derrick
7/8" drill line
Dual drum

Location : USA

Worldrigs ID: WR788
Model : 30K Drill Rig
Manufacturer : Gefco
Year : 2000
Condition : Used

Description :

2000 Gefco / Speedstar 30K Drill Rig
Top head power drive (has been gone through)
6250+ hours
Mounted on a 2000 Peterbilt 357 Truck
CAT C-15 diesel engine
Sullair 1000 cfm / 350 psi air compressor
Newer Oil Cooler
(12,500+ Hours & 102,250+ Miles on gauge)
30,000 lbs of pullback
Hydraulic Leveling Jacks
Package Includes:
Beals & Welco casing hammer (Casing hammer not in the tower but included)
500 ft of drill pipe, 2 drill collars, and basic tooling

Location : USA

Worldrigs ID: WR860
Description :

Schramm TXD90 Drill Rig
Diesel Deck Engine
Mounted on a Truck

Included as a package :
1,519 feet of 3-1/2" Drill Pipe
6" Collars = 2 Joints (1) 25ft Long (1) 12ft Long
All Subs needed to drill
Elevators

Location : USA

Worldrigs ID: WR762
Model : RD20 III Drill Rig
Manufacturer : Atlas Copco
Year : 2007
Condition : Used

Description :

2007 Atlas Copco RD20 Range III Drill Rig & Pipe Handling System
Hours 27,319+
Heavy�duty Derrick and Top head Drive pullback of 120,000 lb
51 ft. 7" in. clearance - plenty of room for 30 ft. drill pipe
8,000 ft�lb. Spur gear power head
Cummins QSK�19C Diesel Deck Engine - rated 755�hp
IR HR2.5 1,250 cfm / 350 psi Air Compressor over/under Air End
Mounted on a CCC (Crane Carrier Company) Truck
Caterpillar C13 Diesel Engine - rated 380 HP
Mileage  32,531+
Note: Package Includes:
2014 Foremost Pipe Handler 4000 Series (hydraulic pipe handling system -
hands free) on a 2 axle Trailer
The engine, compressor and hydraulic pumps are mounted on a floating
power�pack

Location : USA

Worldrigs ID: WR214

Model: 650 Drill Rig
Manufacturer: Chicago Pneumatic
Year: 1986
Condition: Used

Description :

1986 Chicago-Pneumatic 650 Drill Rig
GHH 825 cfm / 350 psi Air Compressor
CAT 3406 diesel deck engine
Mounted on Ford truck
diesel engine
Around 1,000 ft of near new drill pipe at extra cost

Location : USA

Worldrigs ID: WR543

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig
Serial Number T64HB-472
425 cfm / 250 psi Air Compressor
Detroit 8V71N Diesel Deck Engine
Pipe Rack
3 hydraulic leveling jacks
Mounted on International Fleetstar 1910 A truck p/b Gasoline Engine

Location : USA

Worldrigs ID: WR799
Model : T4W LT Range II Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2005
Condition : Used

Description :

Ingersoll-Rand T4W LT (Long Tower) Range II Drill Rig
2005 CAT C-12 Diesel Engine (4,000 hours)
Ingersoll-Rand 1170 cfm / 350 psi Air Compressor
70,000 lbs of Pullback (Deep Hole)
4 hole gearbox and 2 hole gearbox
High Torque Spur Gear power head with cushion sub
Bean Water Injector Pump rated at 2000 psi
Mounted on a CCC (Craine Carrier Company)
CAT 3406 Diesel Engine
2400 Gal Fuel Tank with Hose Reels
12V Electric Pump

Mounted on a 32 ft Tandum Axle trailer
Sullair 1150 cfm / 350 psi Air Compressor
CAT C-15 Diesel Engine with 7,000 hours

Hurricane Booster - rated 900 lbs of pressure
CAT 3126 Diesel Engine
Both mounted on a 32' ft Tandum Axle Trailer

120 Pipe of T4 style drill pipe (3,000 ft) 3-1/2" Reg Pin and Box
5 check valve subadapters
Pipe and adapters are all loaded on 2 tandum axle flat bed trailers
Drill Rig Base or Platform
14" tall 35 ft long 10 ft wide with folding ramps and fold down walkways
38 ft tandum axle trailer with roller for moving
IR-120 Hammer with 12-1/4" bit x 11" x 20 Stabilizer
IR-TD-90 Hammer with 8-7/8" bit x 8" x 20 Stabilizer
IR QLX-60 Hammer w/ 6-1/4"bit, 6" by 25ft Stabilizer
3 sets of Casing Clamp type Elevators for 4-1/2", 7" & 9-5/8"
Washington rotation head diverter assembly with adaptter plates
35 ft of blow pipe with hammer unions
2 complete Petol wrenches, Misc Table bushings & Wrenches Forks and Subs

Location : USA

Worldrigs ID: WR146
Model : GXXTA D/D Back-In Well Service Rig
Manufacturer : Hopper
Condition : Used

Description :

Hopper GXXTA D/D Back-In Well Service Rig - S/N: 191
Detroit Series 60 Diesel Engine
Allison 5860 Transmission
15” Double Hydro Brake
Pemco 96’ ft H 180,000 lbs Mast
Hydraulic Raised & Scoped
Rod & Tubing Boards
Mounted on a CCC (Crane Carrier Company) 5-Axle Truck
Leveling Jacks
385/65R22.5 Front & 11R24.5 Rear Tires
Disc Wheels
Sold by "Bill of Sale" only
 

Location : USA
 

Worldrigs ID: WR869
Description :

1972 Chicago Pneumatic 650 Drill Rig
Sullair 750/250 air compressor (verifying the size & model)
Caterpillar 3306 Diesel Deck Engine
Gardner Denver 5x6 air driven mud pump
Hydraulic slide pipe rack
Winch
Mounted on a Ford 900 Truck (VIN #: T91KVN93939)
Caterpillar 3208 Diesel Engine
Bobcat welder

Location : USA

Worldrigs ID: WR802
Model : 2800 HSHT Drill Rig
Manufacturer : Simco
Year : 1989
Condition : Used

Description :

1989 Simco 2800 HSHT Drill Rig
8805 hours
Wisconsin VG4D gas deck engine
4x3 Centrifugal mud pump powered by Deutz F4L921 diesel engine (1853 hours)
Mounted on a GMC K3500 Truck 4x4
454 gas engine with 182,638 miles

Location : USA

Worldrigs ID: WR827
Description :

1979 Jaswell 1200 Drill Rig
Mounted on a Paystar 5000 Truck
Detroit 8V92T Diesel Deck Engine (newer clutch)
Sullair 900 cfm / 350 psi Air Compressor (Recent Compressor and Radiator)
New Chains and updated pumps, gear box
Has cat walk
Recent Oil change
Mounted on a Paystar 5000 Truck
Detroit 671 turbo diesel engine
newer rear tires
5 +4 Transmission
All newer paint

Location : USA

Worldrigs ID: WR539

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig - Serial Number: T64HB-1313
425 cfm / 250 psi Air Compressor
Detroit 8V71N Diesel Deck Engine
Pipe Rack
3 hydraulic leveling jacks
Mounted on a GMC truck - VIN TJV738V578079
diesel engine

Location : USA

Worldrigs ID: WR77

Model : T-555
Manufacturer : Schramm
Year : 2002
Condition : Used

Description :

2002 Schramm T-555 Drill Rig
Sullair 1070 CFM / 500 PSI Air compressor,
75,348 in lbs torque @ 0-131 RPM,
40,000 pullback,
30,000 pulldown.
CAT C-15 DIT Diesel Deck Engine @ 565 HP with 6,326 Hours
18 GPM Bean water pump
280' ft of (4 1/2 rod with 3 1/2 IF pin, box ends).
Note: can hold 300' ft in the rod box and can run 20" Casing pipe
DTH oilier, Sandline Semco S6
Hydraulic swing and extend Jib boom
Secondary winch Pullmaster M8-3-30-1
Primary winch
Mounted on a 2002 International 2674 Truck
Powered by Cummins ISM370 Diesel Engine
21,529 miles

Location : USA

Worldrigs ID: WR875
Description :

2005 Atlas Copco T4BH (Blast Hole) Drill Rig - S/N: 8208
Note: Can be converted to T4W and set up for water well drilling at an extra cost
IR HR2 900 cfm / 350 psi Air Compressor
Cummins QSX15 Diesel Deck Engine
Spur Gear Power Head
7 Rod Carousel
2-Cylinder Bean Water Injection
Hammer Oiler
Note: Hours Unknown (we believe they are lower)
Drillers Cab
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company)
CAT C-10 Diesel Engine

Location : USA

Worldrigs ID: WR865
Description :

UDR 1500 Range III Mobile Drill Rig
Mounted on a 2004 International 5800i Tri-Axle Truck
Engine Hours : 11,804
75 ft - 90,000 lb static hook load capacity
hydraulic raise and lower mast
Rexroth 44,000 lb draw works
Top drive
GD mud pump
CAT C15 14.6L diesel engine
525 Adv horsepower
Engine brake
Eaton Fuller 18 speed manual transmission
352” wheel base
40,000 lb front axle
51,000 lb rears
Rig was almost completely overhauled . Hydraulics , hoses, box  etc.

Location : North America

Worldrigs ID: WR103

1995 Foremost Barber DR12/36 drill rig
Sullair 1150 CFM / 350 PSI Air Compressor

Worldrigs ID: WR598
Model : T130XD Drill Rig - Tilt Power Head
Manufacturer : Schramm
Year : 2007
Condition : Used

Description :

2007 Schramm T130XD Drill Rig
Detroit DDC/MTU V12-2000TA DDEC Diesel Deck Engine
18,500 Hours
Top Head: Tilt head - two hydraulic motors. 0-143 RPM with 106,600 in-lb of torque
50' feet (15.25 m) of clear head travel
Range III casing
130,000 lbs of Pullback
Free standing design with 28" table opening
Hydraulic pumps
Proheat engine heater
Hydraulic stabilizers
Mounted on a CCC (Crane Carrier Corp) 10X4X4 Truck
Caterpillar C13 ACERT Diesel Engine
Eaton Fuller 8LL Transmission
Air Lift 3rd axle

Location : USA

Worldrigs ID: WR881
Description :

2003 Schramm T450 Crawler Drill Rig
Serial Number : J102-B236
Sullair 900 CFM / 350 PSI Air Compressor (serial number: 004-005820) - rated
1800 RPM
Caterpillar 3406B diesel deck engine
Hour meter shows 10,360 hours
Proheat Engine Heater
Bean FMC 2 Cylinder water injection pump
6 Rod Carousel
Graco Hammer Oiler
Pullback: 30,000 lb (13,608 kg)
16.5 inch table opening
Crawler mounted (note: can be mounted on a 2005 Kenworth double frame truck)

Location : USA

Worldrigs ID: WR839
Description :

LTD 360 Cable Drill Rig
Carries enough mainline cable to drill to a depth of 450 feet
Bore diameters of 4" to 10" inches
Lift capability of 8,000 lbs for casing removal
40 gallons of on-board water storage with a 40 PSI pump
150 amp arc welder when steel casing is used
20 gallons of fuel (enough to drill about 75 feet)
Rated - Penetration rates usually range between 2-½-5 feet per hour
depending on the geology/ground formations with drilling conditions
Mounted on a 2 axles trailer

Location : USA

Worldrigs ID: WR883
Description :

1981 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package
900/350 on-board air,
mounted on a tandem axle steer Kenworth carrier -75,000# pull-back,
4-rod carousel,
CAT 3406B deck engine recently replaced (less than 500 hours ago),
rebuilt dual top-head motors and planetaries,
rebuilt rotational pump and fan motor/pump,
new Nylotron head guides,
new winch line

Additional equipment included :
3,200ft 4 1/2"  x 30ft drill pipe with tandem axle drill pipe trailer
mounted IR tugger winch,
skid mounted Sullair 900/350 air compressor,
skid mounted 2000 gallon fuel tank,
skid mounted 300 bbl water tank,
skid mounted doghouse,
spare CAT 3406B engine (needs rebuilt),
6" hammer, 12" hammer/stabilizer combo,
12" tri-cone stabilizer,
casing lifters for both threaded and plain-end,
casing slips, break out wrench, J-wrench.

Location : USA

Worldrigs ID: WR867
Description :

1980 Ingersoll-Rand TH60 Drill Rig - 0428
Ingersoll-Rand 750 cfm / 250 psi Air Compressor
Bean Triplex Water Injectior Pump
420 ft of (3-1/2" x 20) Drill Pipe
2 Used Hammers & Bits, Slips and Tooling included
10 Rod Carousel
18,000 lbs Winch
Pipe Rack
Hydraulic leveling jacks
Mounted on a 1978 International Harvestor F-5070 Truck
Detroit 8V92 Diesel Engine

Note: Rig is operational but needs a few repairs

Location : USA

Worldrigs ID: WR774
Model : T4W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1995
Condition : Used

Description :

1995 Ingersoll-Rand T4W Drill Rig
IR 1000 cfm / 350 psi Air Compressor - (14,000 hours)
Cummins QSK Diesel Deck Engine - rated 600 HP & 2100 RPM - (Reman
as of March 2016 with 1,971 hours on meter as of 8-6-2019)
50,000 lbs of pullback
Worm Gear Power Head
Water Injection Pump
Hammer Lubricator
7 & 4 Rod Carousel
Starting Aid Diesel Fired Pre-heater with Ether
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck
Caterpillar 3306 C diesel engine
mileage 75,000

Location : USA

Worldrigs ID: WR884
Description :

CME 55 Drill Rig
3 winches
6 Cylinder Ford gas engine on deck
6-ton boom for lifting augers
3 leveling jacks
Toolboxes on side
All new cables and new bushings up top
Mounted on a 1980 Ford Louisville truck
Caterpillar diesel engine

Tooling Included:
Qty. 2 – SPT Hammers
Qty. 2 – Split Spoons
Qty. 6 – New 8” OD / 4” ID Hollow Stem Augers (5 ft. lengths), with drive cap.
Qty. 12 – 12” OD / 43” ID Hollow Stem Augers (5 ft. lengths), with 3 bits and drive cap.
Qty. 8 – 6” OD / 3” ID Hollow Stem Augers (5 ft. lengths), with drive cap.
Qty. 21 – 6” solid augers, 5 ft. lengths.
Qty. 5 – 1-3/4” drill rods, 10 ft. lengths.
Qty. 9 – 1-3/4” drill rods, 5 ft. lengths.
Qty. 1 – 3-1/3” bit
Qty. 1 – 4” bit

Location : North America (Canada)