Water Well Swivels
Quick Links
  • For all types of drilling requiring a small lightweight swivel - 1JW - 2JW
  • For all types of drilling – 3JW
  • For water, geophysical, and monitoring well drilling – 15WX – 15WXA – 20WX – 20WXA – 30WX – 30WXA
  • For TH-55 and TH-60 drills – 20WIR – 20WIRA
  • For TH-75 and TH-75W and T3W deep hole – 40RM – 40RM-50RR
  • Fits all TH-75 and TH-75E - 40PGIR - 40PGIR-50RR
  • For drilling rigs with chain or cable pull down – 15WM – 15WMA
  • For pulldown rigs – 25DM – 25AM – 25CHD – 25CHD-R
  • For deep water well, workover, and shallow oil well drilling – 30PG – 40PG – 50PG
  • Designed for water well, but oilfield tough – 60PG
  • Packing Assembly for 30PG, 40PG, 50PG Swivel - 30PG 40PG 50PG

1JW Swivel


  • For all types of drilling requiring a small lightweight swivel
  • Alloy steel bail, spindle, and lower connection
  • High thrust ball bearings in a grease-lubricated sealed housing
  • Simple design allows quick packing replacement and easy field repairs
  • Available with several different hose connections
  • Special lower connections available upon request

Capacities and Safe Drill Depths
  • Static Load - 5,000 lbs.
  • Drill Depth - 500 ft. @ 100 rpm
  • Drill Pipe Size - 1 1/4" standard pipe
Technical Data
Length Weight Hose Connection Lower Connection Watercourse Working Pressure
13" 10 lbs.-aluminum 15 lbs.-iron 1" NPT female 1 1/4" NPT male 1" or 1 1/4" LH or RH NPT 1" 300 psi

Parts List
Part Number Description Quantity Required Weight/lb. (each)
1JW-2010-XX Swivel, iron or aluminum, 1" female or 1 1/4" male NPT hose connection, with 1 1/4" NPT left or right-hand pin lower connection
Additional for special lower connection
1JW-01B Iron gooseneck, 1" female Optional 4.12
1JW-01C Iron gooseneck, 1 1/4" male 1 4.12
1JW-01AB Aluminum gooseneck, 1" female Optional 1.56
1JW-01AC Aluminum gooseneck, 1 1/4" male Optional 1.56
1JW-02 Bail with nuts 1 1.62
1JW-03 + packing 2 .03
1JW-03-90 Packing, 90 Duro Optional .03
1JW-03V Packing, Viton Optional .03
1JW-04 + wearbushing 1 .18
1JW-05 Bearing spindle 1 1.12
1JW-06BA-RP Lower connection, 1" NPT RH pin Optional 1.50
1JW-06BA-LP Lower connection, 1" NPT LH pin Optional 1.50
1JW-06CA-RP Lower connection, 1 1/4" NPT RH pin Optional 1.50
1JW-06CA-LP Lower connection, 1 1/4" NPT LH pin 1 1.50
1JW-06YA-RP Lower connection, A rod RH pin Optional 3.00
1JW-07 + housing seals 2 .06
1JW-07V Housing seals, Viton Optional .06
1JW-08A Aluminum, bearing housing Optional 1.50
1JW-08 Iron, bearing housing 1 4.00
1JW-09 + bearings 2 1.68
1JW-40 Maintenance kit (8) 1JW-03 (1) 1JW-04
1JW-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

2JW Swivel


  • For all types of drilling requiring a small lightweight swivel
  • Alloy steel bail, spindle, and lower connection
  • High thrust ball bearings in a grease-lubricated sealed housing
  • Simple design allows quick packing replacement and easy field repairs
  • Available with several different hose connections
  • Special lower connections available upon request

Capacities and Safe Drill Depths
  • Static Load - 7,000 lbs.
  • Drill Depth - 500 ft. @ 100 rpm
  • Drill Pipe Size - 2" standard pipe
Technical Data
Length Weight Hose Connection Lower Connection Watercourse Working Pressure
16" 14 lbs.-aluminum
21 lbs.-iron		 1 1/2" NPT female
2" NPT male		 1 1/2" or 2"
LH or RH NPT		 1 1/2" 300 psi

Parts List
Part Number Description Quantity Required Weight/lb. (each)
2JW-2020-XX Swivel, iron or aluminum, 1 1/2" female or 2" male NPT hose connection, with 1 1/2" or 2" NPT right or left pin lower connection
Additional for special lower connection
2JW-01D Iron gooseneck, 1 1/2" female 1 5.62
2JW-01E Iron gooseneck, 2" male Optional 5.62
2JW-01AD Aluminum gooseneck, 1 1/2" NPT female Optional 2.09
2JW-01AE Aluminum gooseneck, 2" male Optional 2.09
2JW-02 Bail with nuts 1 2.10
2JW-03 + packing 2 .04
2JW-03-90 Packing, 90 Duro Optional .04
2JW-03V Packing, Viton Optional .04
2JW-04 + wearbushing 1 .25
2JW-05 Bearing spindle 1 2.00
2JW-06DA-RP Lower connection, 1 1/2" NPT RH pin Optional 2.50
2JW-06DA-LP Lower connection, 1 1/2" NPT LH pin Optional 2.50
2JW-06EA-RP Lower connection, 2" NPT RH pin Optional 2.50
2JW-06EA-LP Lower connection, 2" NPT LH pin 1 2.50
2JW-06YN3-RP Lower connection, N rod RH pin, 3 thread Optional 4.75
2JW-06YNW-RP Lower connection, NW rod RH pin Optional 4.75
2JW-07 + housing seal 2 .06
2JW-07V Housing seal, Viton Optional .06
2JW-08A Aluminum, bearing housing Optional 2.00
2JW-08B Iron, bearing housing 1 5.50
2JW-09 + bearing 2 2.25
2JW-40 Maintenance kit: (8) 2JW-03; (1) 2JW-04
2JW-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

3JW Swivel


  • For all types of drilling
  • For rotating speed to 500 rpm
  • Constructed from a high-grade alloy steel
  • Grease-lubricated thrust ball bearings in a sealed housing
  • Available with or without stiff bail
  • Compact
  • Simple design allows for easy field maintenance and repair
  • Choice of lower connection threads

Capacities and Safe Drill Depths
  • Static Load - 10,000 lbs.
  • Rotating Loads - 7,200 lbs.
  • Rotating Speed - 100 rpm
  • Drill Depth - 2,000 ft.
  • Pipe Size - 2" standard pipe
Technical Data
Length Weight Hose Connection Lower Connection Watercourse Working Pressure
19" 36 lbs. 2" pin 2" or 2 1/2" pin LH or RH NPT max. 2" 300 psi

Parts List
Part Number Description Quantity Required Weight/lb. (each)
3JW-2030-XX Western swivel, bail, 2" NPT male or female hose connection, with 2" right or left-hand pin lower connection
Additional for special lower connection
3JW-01 Gooseneck, 2" NPT male hose connection Optional 8.00
3JW-02 Bail with nuts 1 6.00
3JW-02L Bail, long with nuts Optional 7.50
3JW-02A Studs with nuts Optional 2.00
3JW-03 + packing 2 .06
3JW-03-90 Packing, 90 Duro Optional .06
3JW-03V Packing, Viton Optional .06
3JW-04 + wearbushing 1 .25
3JW-05 Bearing spindle 1 3.00
3JW-06EA-RP Lower connection, 2" NPT RH pin Optional 4.00
3JW-06EA-LP Lower connection, 2" NPT LH pin 1 4.00
3JW-06TA-RP Lower connection, 2 1/2" NPT RH pin Optional 6.00
3JW-06TA-LP Lower connection, 2 1/2" NPT LH pin Optional 6.00
3JW-07 + housing seal 2 .25
3JW-07V Housing seal, Viton Optional .25
3JW-08 Bearing housing 1 9.00
3JW-09 + bearing 2 3.00
OR-Q-330 + spindle thread seal 1 .06
3JW-40 Maintenance kit (8) 3JW-03 (1) 3JW-04
3JW-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

15WX Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 50,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 2,700 ft.
  • Safe Depth - 2 7/8" - 1,800 ft.
Technical Data
Length Weight (each) Hose Connection Lower Connection Pin Watercourse Working Pressure Bail Opening
33" 95 lbs. 2" NPT female 2 7/8" OD 8V LH 2" ID to 300 psi 3 3/4" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
15WX-3010-XX Western swivel, less bail, 2" NPT female hose connection and 2 7/8" OD 8V left-hand
pin lower connection
Additional for bail, special lower connection, and Trunnion pin
15WX-01 Bail 1 16.00
15WX-02 Bail pin 1 3.00
15WX-02A Bail pin nut 2 .50
15WX-04A Gooseneck, 2" NPT female hose connection 1 28.00
15WX-05 + packing 2 .25
15WX-05-90 Packing, 90 Duro, high pressure Optional .25
15WX-05V Packing, Viton Optional .25
15WX-06 + wearbushing 1 .50
15WX-07 + housing seals 2 .12
15WX-07V Housing seals, Viton Optional .12
15WX-08 Spindle nut 1 3.50
15WX-09 + shield seal 1 .25
15WX-10 + bearing shield 1 .37
15WX-11 Bearing retainer wire 1 .12
15WX-12 + bearings, downthrust / upthrust 4 5.00
15WX-14 Bearing housing 1 16.00
15WIR-14A Bearing housing, with 2 Trunnion pins Optional 24.00
15WX-15 Lock screw and nut, bearing housing 1 .25
15WX-16GD-LP Spindle, 2 7/8" OD 8V LH pin 1 15.00
15WX-16GE-LP Spindle, 2 7/8" IF LH pin Optional 15.00
15WX-17 + spindle thread seal 1 .06
15WX-40 Maintenance kit (8) 15WX-05, (1) 15WX-06
15WX-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

15WXA - Adjustable Packing Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 50,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 2,700 ft.
  • Safe Depth - 2 7/8" - 1,800 ft.
Technical Data
Length Overall Weight (each) Hose Connection Lower Connection Pin Watercourse Working Opening Bail Opening
36" 125 lbs. 2" NPT female 2 7/8" OD 8V LH max. 2" ID to 300 psi 3 3/4" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
15WXA-3010-XX Western swivel, less bail, 2" NPT female hose connection, with adjustable packing, with 2 7/8" OD 8V LH pin lower connection
Additional for bail, "special spindle", and Trunnion pins
15WX-01 Bail Optional 16.00
15WX-01E Elevator shank Optional 38.00
15WX-02 Bail pin 1 3.50
15WX-02A Bail pin nut 2 .50
15WXA-04A Gooseneck, 2" NPT female 1 43.00
15WX-05 + packing 2 .25
15WX-05-90 Packing, 90 Duro (red) Optional .25
15WX-05V Packing, Viton Optional .25
15WX-06 + wearbushing 1 .50
15WX-07 + housing seal 2 .12
15WX-07V Housing seal, Viton Optional .12
15WX-08 Spindle nut 1 3.50
15WX-09 + shield seal 1 .25
15WX-10 + bearing shield 1 .37
15WX-11 Bearing retainer wire 1 .12
15WX-12 + bearings 4 2.75
15WX-14 Bearing housing 1 16.00
15WX-14A Bearing housing, 2" OD pins Optional 28.00
15WX-15 Lock screw and nut, bearing housing 1 .25
15WX-16GD-LP Spindle, 2 7/8" OD 8V LH pin 1 15.00
15WX-16GE-LP Spindle, 2 7/8" IF LH pin Optional 23.00
15WX-17 + spindle thread seal 1 .06
15WXA-19-R Packing adjusting gland 1 8.25
15WXA-20 Adjusting screw with nuts 2 1.00
OR-036 + O-Ring, adjusting gland 2 .01
15WX-40 Maintenance kit (8) 15WX-05, (1) 15WX-06
15WXA-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

20WX Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 70,000 lbs.
  • Rotating Load - 36,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 3,600 ft.
  • Safe Depth - 2 7/8" - 2,400 ft.
  • Safe Depth - 3 1/2" - 1,800 ft.
Technical Data
Length Weight (each) Hose Connection Lower Connection Pin Watercourse Working Pressure Bail Opening
34" 140 lbs. 2 1/2" NPT female 3 1/2" OD 8V LH 2 1/2" ID to 300 psi 4 1/4" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
20WX-3020-XX Western swivel, less bail, 2 1/2" NPT female hose connection, with 3 1/2" OD 8V LH pin / 3 1/2" IF LH pin lower connection
Additional for bail, pulldown Trunnion pins, and special LH pin lower connection
20WX-01 Bail 1 21.00
20WX-02 Bail pin 1 4.00
20WX-02A Bail pin nut 2 .75
20WX-04A Gooseneck, 2 1/2" NPT female hose connection 1 43.00
20WX-05 + packing 2 .25
20WX-05-90 Packing, 90 Duro, high pressure Optional .25
20WX-05V Packing, Viton Optional .25
20WX-06 + wearbushing 1 1.00
20WX-07 + housing seals 2 .12
20WX-07V Housing seals, Viton Optional .12
20WX-08 Spindle nut 1 4.50
20WX-09 + shield seal 1 .37
20WX-10 + bearing shield 1 .50
20WX-11 Bearing retainer wire 1 .12
20WX-12 + bearings 4 4.25
20WX-14 Bearing housing 1 28.00
20WIR-14A Bearing housing, 7 1/2" shoulders / 2" Trunnion pins Optional 37.00
20WIR-14B Bearing housing, 8 5/16" shoulders / 2" Trunnion pins Optional 37.00
15WX-15 Lock screw and nut, bearing housing 1 .25
20WX-16JD-LP Lower connection, 3 1/2" OD 8V LH pin 1 28.00
20WX-16JE-LP Lower connection, 3 1/2" IF LH pin Optional 34.00
20WX-16GE-LP Lower connection, 2 7/8" IF LH pin Optional 33.00
20WX-17 + spindle thread seal 1 .06
20WX-40 Maintenance kit (8) 20WX-05, (1) 20WX-06
20WX-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

20WXA - Adjustable Packing Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 70,000 lbs.
  • Rotating Load - 36,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 3,600 ft.
  • Safe Depth - 2 7/8" - 2,400 ft.
  • Safe Depth - 3 1/2" - 1,800 ft.
Technical Data
Length Overall Weight (each) Hose Connection Lower Connection Pin Watercourse Working Opening Bail Opening
38" 165 lbs. 2 1/2" NPT female 3 1/2" OD 8V LH Max. 2 1/2" ID to 300 psi 4 1/4" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
20WX-3120-XX Western swivel, less bail, 2 1/2" NPT female hose connection, with adjustable packing, with 3 1/2" OD 8V / 3 1/2 IF LH pin lower connection
Additional for bail, "special spindle," and Trunnion pins
20WX-01 Bail 1 21.00
20WX-01E Elevator shank Optional 42.00
20WX-02 Bail pin 1 4.00
20WX-02A Bail pin nut 2 .75
20WXA-04A Gooseneck, 2 1/2" NPT female 1 58.00
20WX-05 + packing 2 .25
20WX-05-90 Packing, 90 Duro (red) Optional .25
20WX-05V Packing, Viton Optional .25
20WX-06 + wearbushing 1 1.00
20WX-07 + housing seal 2 .12
20WX-07V Housing seal, Viton Optional .12
20WX-08 Spindle nut 1 4.50
20WX-09 + shield seal 1 .37
20WX-10 + bearing shield 1 .50
20WX-11 Bearing retainer wire 1 .12
20WX-12 + bearings 4 4.25
20WX-14 Bearing housing 1 37.00
20WIR-14A Bearing housing, 7 1/2" shoulders 2" pin Trunnion pins Optional 43.00
20WIR-14B Bearing housing, 8 5/16" shoulders 2" pin Trunnion pins Optional 45.00
15WX-15 Lock screw with nut, bearing housing 1 .25
20WX-16JD-LP Spindle, 3 1/2" OD 8V LH pin 1 28.00
20WX-16JE-LP Spindle, 3 1/2" IF LH pin Optional 34.00
20WX-16GE-LP Spindle, 2 7/8" IF LH pin Optional 31.00
20WX-17 + spindle thread seal 1 .06
20WXA-19-R Packing adjusting gland 1 7.25
15WXA-20 Adjusting screw with nuts 2 1.75
OR-240 + O-Ring, adjusting gland 2 .01
20WX-40 Maintenance kit (8) 20WX-05, (1) 20WX-06
20WXA-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

30WX Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 90,000 lbs.
  • Rotating Load - 50,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 5,000 ft.
  • Safe Depth - 2 7/8" - 3,300 ft.
  • Safe Depth - 3 1/2" - 2,600 ft.
  • Safe Depth - 4 1/2" - 2,100 ft.
Technical Data
Length Weight (each) Hose Connection Lower Connection Pin Watercourse Working Pressure Bail Opening
39" 205 lbs. 3" NPT female 4 1/2" OD 8V LH 3" ID to 300 psi 5" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
30WX-3030-XX Western swivel, less bail, 3" NPT female hose connection, with 4 1/2" OD 8V LH pin lower connection
Additional for bail, pulldown Trunnion pins, special lower connection, and elevator shank (3 1/2" or smaller)
30WX-01 Bail (5" x 8") 1 26.00
30WX-01E Elevator shank (3 1/2" or smaller) Optional 71.00
30WX-02 Bail pin 1 6.50
20WX-02A Bail pin nut 2 .75
30WX-04A Gooseneck, 3" NPT female hose connection 1 43.00
6JW-05 + packing 2 .25
6JW-05-90 Packing, 90 Duro (high pressure) Optional .25
6JW-05V Packing, Viton Optional .25
30WX-06 + wearbushing 1 2.00
5JW-07 + housing seal 2 .25
5JW-07V Housing seal, Viton Optional .25
30WX-08 Spindle nut 1 6.00
30WX-09 + shield seal 1 .50
30WX-10 + bearing shield 1 .75
5JW-11 Bearing retainer wire 1 .12
5JW-12 + bearings 4 8.00
30WX-14 Bearing housing 1 42.00
30WX-14A Bearing housing with pins, 2" OD, 8 15/16" shoulders Optional 57.00
15WX-15 Housing bolt and nut 1 .25
30WX-16KD-LP Spindle, 4 1/2" OD 8V LH pin 1 37.00
30WX-16JG-LP Spindle, 3 1/2" full hole LH pin Optional 37.00
30WX-16JE-LP Spindle, 3 1/2" IF LH pin Optional 39.25
30WX-16XJE-LP Spindle, 3 1/2" IF LH pin (shorten pin, full 3" ID) Optional 38.50
5JW-17 + spindle thread seal 1 .06
30WX-40 Maintenance kit (8) 6JW-05, (1) 30 WX-06
30WX-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

30WXA - Adjustable Packing Swivel


  • For water, geophysical, and monitoring well drilling
  • Light weight
  • Alloy steel construction for strength
  • Large watercourse
  • For pulldown or kelly bar machines
  • Flexible bail or elevator shank available
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available
  • Choice of lower connection threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 90,000 lbs.
  • Rotating Load - 50,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 5,000 ft.
  • Safe Depth - 2 7/8" - 3,300 ft.
  • Safe Depth - 3 1/2" - 2,600 ft.
  • Safe Depth - 4 1/2" - 2,100 ft.
Technical Data
Length Overall Weight (each) Hose Connection Lower Connection Pin Watercourse Working Opening Bail Opening
41" 225 lbs. 3" NPT female 4 1/2" OD 8V LH max. 3" ID to 300 psi 5" x 8"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
30WXA-3120-XX Western swivel, less bail, 2 1/2" NPT female hose connection, with adjustable packing, with 4 1/2" OD 8V LH pin lower connection
Additional for bail, elevator shank, (3 1/2" OD or smaller), "special spindle", and Trunnion pins
30WX-01 Bail 1 21.00
30WX-01E Elevator shank (3 1/2" OD or smaller) Optional 42.00
30WX-02 Bail pin 1 4.00
30WX-02A Bail pin nut 2 .75
30WXA-04A Gooseneck, adjustable, 3" NPT female 1 58.00
6JW-05 + packing 2 .25
6JW-05-90 Packing, 90 Duro (red) Optional .25
6JW-05V Packing, Viton Optional .25
30WX-06 + wearbushing 1 1.00
5JW-07 + housing seal 2 .12
5JW-07V Housing seal, Viton Optional .12
30WX-08 Spindle nut 1 4.50
30WX-09 + shield seal 1 .37
30WX-10 + bearing shield 1 .50
5JW-11 Bearing retainer wire 1 .12
5JW-12 + bearings 4 4.25
30WX-14 Bearing housing 1 37.00
30WX-14A Bearing housing, 8 15/16" shoulders, 2" Trunnion pins Optional 43.00
15WX-15 Lock screw with nut, bearing housing 1 45.00
30WX-16KD-LP Spindle, 4 1/2" OD 8V LH pin 1 .25
30WX-16JG-LP Spindle, 3 1/2" full hole LH pin Optional 28.00
30WX-16JE-LP Spindle, 3 1/2" IF LH pin Optional 34.00
30WX-16XJE-LP Spindle, 3 1/2" IF LH pin (shorten pin, 3" ID) Optional 31.00
5JW-17 + spindle thread seal 1 .06
30WXA-19 Packing adjusting gland 1 7.25
30WXA-20 Adjusting screw with nuts 2 1.75
OR-342 + O-Ring, adjusting gland 2 .01
30WX-40 Maintenance kit (8) 6JW-05, (1) 30WX-06)
30WXA-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

20WIR Swivel


  • For TH-55 and TH-60 drills
  • Alloy steel construction for strength and durability
  • For mud and air drilling
  • Trunnion pins to 2"
  • Thrust ball bearings for supporting pipe load and radial load
  • Designed for easy service and field maintenance
  • Equal hoisting and pull down load capacity
  • Longer spindle available

Safe Weight Loads
  • Static Load - 40,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Drill Depth - 1,800 ft.
  • Drill Depth - 1,400 ft.
  • Size / Weight/Ft. - 2 7/8" / 10.4 lbs.
  • Size / Weight/Ft. - 3 1/2" / 13.3 lbs.
Technical Data
Packing Length Overall Weight (each) Hose Connection Lower Connection Water Pressure Working Opening
Fixed 20 1/2" 116 lbs. 3" NPT female 3 1/2" IF LH 2 1/2" to 300 psi
37 1/2" 155 lbs. 3" NPT female 3 1/2" IF LH (long) 2 1/2" to 300 psi

Parts List
Part Number Description Quantity Required
20WIR-3200-XX Western swivel, 3" NPT female hose connection straight up, 2" OD Trunnion pins on 7 1/2" shoulder, with 3 1/2" IF LH pin lower connection
Additional for long 3 1/2" IF LH pin lower connection
20WIR-04 Gooseneck, 3" NPT female hose connection 1
20WX-05 + packing 2
20WX-05-90 Packing, 90 Duro (high pressure) Optional
20WX-05V Packing, Viton Optional
20WX-06 + wearbushing 1
20WX-07 + housing seal 2
20WX-07V Housing seal, Viton Optional
20WX-08 Spindle nut 1
20WX-09 + shield seal 1
20WX-10 + bearing shield 1
20WX-11 Bearing retainer wire 1
20WX-12 + bearings 4
20WIR-14A Bearing housing with pins, 2" OD, 7 1/2" shoulders 1
15WX-15 Lock screw and nut, bearing housing 1
20WX-16JE-LP Lower connection, 3 1/2" IF LH pin 1
20WX-16XJE-LP Lower connection, long 3 1/2" IF LH pin Optional
20WX-17 + spindle thread seal 1
20WX-40 Maintenance kit (8) 20WX-05, (1) 20WX-06
20WXA-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

20WIRA - Adjustable Packing Swivel


  • For TH-55 and TH-60 drills
  • Alloy steel construction for strength and durability
  • For mud and air drilling
  • Trunnion pins to 2"
  • Thrust ball bearings for supporting pipe load and radial load
  • Designed for easy service and field maintenance
  • Equal hoisting and pull down load capacity
  • Longer spindle available
  • Adjustable Packing

Safe Weight Loads
  • Static Load - 40,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Drill Depth - 1,800 ft.
  • Drill Depth - 1,400 ft.
  • Size / Weight/Ft. - 2 7/8" / 10.4 lbs.
  • Size / Weight/Ft. - 3 1/2" / 13.3 lbs.
Technical Data
Packing Length Overall Weight (each) Hose Connection Lower Connection Water Pressure Working Opening
Adjustable 24 1/2" 138 lbs. 3" NPT female 3 1/2" IF LH 2 1/2" to 300 psi

Parts List
Part Number Description Quantity Required
20WIRA-3521-XX Western swivel, 3" NPT female hose connection, with Adjustable Packing,
two 2" OD Trunnion pins on 7 1/2" shoulder with 3 1/2" IF LH pin lower connection
Additional for long 3 1/2" IF LH pin lower connection
20WIRA-04-R Gooseneck 1
20WX-05 + packing 2
20WX-05-90 Packing, 90 Duro Optional
20WX-06 + wearbushing 1
20WX-07 + housing seal 2
20WX-08 Spindle nut 1
20WX-09 + shield seal 1
20WX-10 + bearing shield 1
20WX-11 Retainer wire 1
20WX-12 + bearings 4
20WIR-14A Bearing housing 1
15WX-15 Lock bolt and nut 1
20WX-16JE-LP Spindle, 3 1/2" IF LH pin 1
20WX-16XJE-LP Spindle, 3 1/2" IF LH pin, long Optional
20WX-17 + spindle thread seal 1
20WXA-19-R Adjusting gland 1
15WXA-20 Adjusting bolt 2
OR-240 + O-Ring 2
20WX-40 Maintenance kit (8) 20WX-05, (1) 20WX-06 Optional
20WXA-40R Repair kit        + included in repair kit Optional
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

40RM Swivel


  • For TH-75 and TH-75W and T3W deep hole
  • Adjustable Chevron V-ring packing
  • Full 3" fluid passage
  • Grease-lubricated packing and bearing
  • Quick change packing assembly
  • Low pressure packing assembly available

Weight Capacity
  • Static - 140,000 lbs.
  • Rotating - 71,000 lbs. @ 100 rpm
Technical Data
Length Width Height Hose Connection Lower Connection Fluid Passage Working Pressure
40 1/2" 8 15/16" 280 lbs. 3" NPT 3 1/2" IF (MOD) 3" to 1500 psi

Parts List
Part Number Description Quantity Required
40RM-6001-XXX Swivel, 3" NPT female straight up, 2" OD Trunnion pins 8 15/16" shoulder to shoulder, window 45 left of Trunnion pin, 3 1/2" IF LH pin (MOD) lower connection, low pressure packing
40PGIR-18A Bolts with lock washer 4
40PGIR-04RM Gooseneck, 3" NPT female, straight up 1
OR-350 O-Ring, packing box 1
OR-346 O-Ring, packing gland 1
OR-344 O-Ring, Packing gland 1
5JW-20-416 Packing set, low pressure 1
5JW-20 Packing set Optional
40RM-18 Packing box 1
40RM-19 Packing gland 1
5JW-21 Lantern ring 1
5JW-06 Packing adjusting gland 1
40RM-25 Washpipe 1
40RM-26 Slinger ring 1
OR-238 O-Ring, washpipe 1
40PG-07 Housing seal 3
15WX-15 Lock bolt and nut 1
30WX-09 Seal, shield 1
5JW-11 Wire, retainer 1
30WX-10 Shield, bearing 1
40RM-08 Bearing spindle 1
5JW-12 Bearings 5
40PG-14A Bearing housing, with 2" Trunnion pins 1
25AM-16A-1 Set screws 4
OR-236 O-Ring 1
5JW-17 Spindle thread seal 1
40RM-16JE-LP Lower connection, 3 1/2" IF LH pin (MOD) 1
25CHD-25A Bolt, washpipe 4
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

40RM-50RR


  • 1. O-Ring
  • 2. O-Ring
  • 3. Top plate
  • 4. Adjusting gland
  • 5. Standard packing / Packing-90 Duro
  • 6. Wearbushing
  • 7. Lower packing box
  • 8. Bolt
  • 9. O-Ring
  • 10. Slinger
  • Fits 40RM swivel
  • Working pressure from 0 to 350 psi
  • Adjustable packing
  • Packing can be changed without removing capsule
  • Rubber ring packing
Parts List
Part Number Description Quantity Required
40RM-50RR Rubber Ring Packing Assembly
6WJ-05 Packing 2
6JW-05-90 Packing, 90 Duro (red) Optional
6JW-06 Wearbushing 1
T-2W-18RR Top plate 1
T-2W-19RR Gland, adjusting 1
40RM-21-RR Box, lower packing 1
25CHD-25A Bolt 4
OR-350 O-Ring 1
OR-342 O-Ring 2
OR-248 O-Ring 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

40PGIR Swivel


  • Being replaced with 40RM
  • Fits all TH-75 and TH-75E
  • Grease-lubricated and adjustable Chevron packing
  • Full 3" fluid passage
  • Available wear tube

Weight Capacity

  • Static - 140,000 lbs.
  • Rotating - 71,000 lbs. @ 100 rpm
Technical Data
Length Width Weight Hose Connection Lower Connection Fluid Passage Working Pressure
40 1/2" 8 15/16" 280 lbs. 3" NPT 3 1/2" IF (MOD) 3" to 1500 psi

Parts List
Part Number Description Quantity Required
40PGIR-6000-XX Western swivel, for TH-75 drill, 3" NPT H/C, straight up, two 2" Trunnion pins on 8 15/16" shoulders, with 3 1/2" IF (MOD) LH pin lower connection
40PGIR-04RM Gooseneck, 3" NPT female
40PG-07 Housing seal 3
40PGIR-08 SN Spindle nut (new style) 1
40PGIR-08 SN-A Set screw, spindle nut 2
30WX-09 Shield seal 1
30WX-10 Bearing shield 1
5JW-11 Bearing retainer wire 1
5JW-12 Bearing 5
40PG-14A Bearing housing, 2" pins, 8 15/16" shoulders 1
15WX-15 Housing lock bolt and nut 1
40PGIR-15JE-LP Spindle, long, with 3 1/2" IF (MOD) LH pin 1
40PGIR-18 Packing box 1
40PGIR-18A Bolts with washers, packing box 4
40PGIR-19 Packing gland 1
5JW-20 Packing set Optional
5JW-20-416 Packing set, low pressure 1
5JW-21 Lantern ring 1
40PGIR-23 Packing adjusting gland 1
40PGIR-24 Adjusting screw with nut 2
40PGIR-25 Washpipe 1
OR-339 O-Ring, washpipe 1
OR-343 O-Ring, thread seal 1
OR-344 O-Ring, packing gland 1
OR-346 O-Ring, packing gland 1
OR-350 O-Ring, packing box 1
40PGIR-70WT Wear tube Optional
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

40PGIR-50RR


  • Fits 40PGIR swivel
  • Working pressure from 0 to 350 psi
  • Adjustable packing
  • Packing can be changed without removing capsule
  • Rubber ring packing
Parts List
Part Number Description Quantity Required
40PGIR-50RR Rubber Ring Packing Assembly (complete) Optional
30WX-06 Wearbushing 1
6JW-05 Packing 2
6JW-05-90 Packing, 90 Duro (red) Optional
40PGIR-21-RR Nut, adapter (rubber ring) 1
T-2W-18-RR Plate, top (for adjusting gland) 1
T-2W-19-RR Gland, adjusting 1
OR-339 O-Ring, adapter nut 1
OR-342 O-Ring, adjusting gland 2
OR-350 O-Ring, top plate 1
Set screw, top plate 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

15WM Swivel


  • For drilling rigs with chain or cable pull down
  • Constructed from alloy steel for durability
  • For mud and air drilling
  • Can be furnished with bail
  • Trunnion pins to 1 3/4"
  • Thrust ball bearing for supporting pipe load and radial load
  • Designed for easy service and field maintenance
  • Choice of lower connection threads

Safe Weight Loads
  • Static Load - 30,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Drill Depth - 2,700 ft.
  • Drill Depth - 1,800 ft.
  • Size / Weight/Ft. - 2 3/8" / 6.65 lbs.
  • Size / Weight/Ft. - 2 7/8" / 10.4 lbs.
Technical Data
Packing Length Overall Weight (each) Hose Connection Lower Connection Working Pressure Fluid Opening
Fixed 19 1/2" 80 lbs. 2" NPT female 2 7/8" IF LH to 300 psi 2"

Parts List
Part Number Description Quantity Required Weight/lb. (each)
15WM-3600-XX Western swivel, less bail, 2" NPT female hose connection, four pulldown Trunnion pins, with 2 7/8" IF LH pin lower connection
Additional for bail and special lower connection
15WM-01 Bail 1 25.00
15WM-02 + wearbushing retainer 1 3.00
15WM-03 Bolt and lockwasher, w/b retainer 4 .10
15WM-04 Gooseneck, 2" NPT female hose connection 1 24.00
15WM-05 + packing 2 .12
15WM-05-90 Packing, 90 Duro (high pressure) Optional .12
15WM-05V Packing, Viton Optional .12
15WM-06 + wearbushing 1 1.00
15WX-07 + housing seals 2 .25
15WX-07V Housing seals, Viton Optional .25
15WM-08 Bearing spindle 1 10.00
15WX-09 + shield seal 1 .20
15WX-10 + bearing shield 1 .25
15WX-12 + bearings 5 5.00
15WM-14A Bearing housing, (4) 1 3/4" OD on 7" shoulders 1 24.00
15WM-15 Studs and nuts, bearing housing 4 .75
15WM-16GD-LP Lower connection, 2 7/8" OD 8V LH pin 1 12.00
15WM-16GE-LP Lower connection, 2 7/8" IF LH pin 1 12.00
15WM-16FE-LP Lower connection, 2 3/8" IF LH pin 1 12.00
15WX-17 + spindle thread seal 1 .06
15WM-40 Maintenance kit (8) 15WM-05, (1) 15WM-06
15WM-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

15WMA Swivel


  • For drilling rigs with chain or cable pull down
  • Constructed from alloy steel for durability
  • For mud and air drilling
  • Can be furnished with bail
  • Trunnion pins to 1 3/4"
  • Thrust ball bearing for supporting pipe load and radial load
  • Designed for easy service and field maintenance
  • Choice of lower connection threads
  • 15WMA features Adjustable Packing

Safe Weight Loads
  • Static Load - 30,000 lbs.
  • Rotating Load - 27,000 lbs. @ 100 rpm
  • Drill Depth - 2,700 ft.
  • Drill Depth - 1,800 ft.
  • Size / Weight/Ft. - 2 3/8" / 6.65 lbs.
  • Size / Weight/Ft. - 2 7/8" / 10.4 lbs.
Technical Data
Packing Length Overall Weight (each) Hose Connection Lower Connection Water Pressure Working Opening
Adjustable 24 1/2" 105 lbs. 2" NPT female 2 7/8" IF LH 2" to 300 psi

Parts List
Part Number Description Quantity Required Weight/lb. (each)
15WMA-3700-XX Western swivel, less bail, 2" NPT female hose connection, with adjustment packing, four pulldown Trunnion pins, with 2 7/8" IF left-hand pin lower connection
Additional for bail and special lower connection
15WM-01 Bail Optional 25.00
15WMA-04 Gooseneck Optional 39.00
15WX-05 + packing 2 .12
15WX-05-90 Packing, 90 Duro Optional .12
15WX-06 + wearbushing 1 .75
15WX-07 + housing seal 2 .25
15WMA-08 Spindle 1 10.00
15WX-09 + shield seal 1 .20
15WX-10 + bearing shield 1 .25
15WX-12 + bearings 5 5.00
15WM-14A Bearing housing, 7" shoulders, (4) 1 3/4" pins Optional 24.00
15WMA-15 Studs with nut 4 .75
15WM-16GD-LP Lower connection, 2 7/8" OD 8V LH pin Optional 12.00
15WM-16GE-LP Lower connection, 2 7/8" IF LH pin 1 12.00
15WM-16FE-LP Lower connection, 2 3/8" IF LH pin Optional 12.00
15WX-17 + spindle thread seal 1 .06
15WXA-19-R Gland, packing adjusting 1 8.25
15WXA-20 Adjust screw with nuts 2 1.25
OR-036 + O-Ring 2 .01
15WX-40 Maintenance kit (8) 15WX-05, (1) 15WX-06
15WMA-40R Repair kit        + included in repair kit
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

25DM Swivel


  • Fluid passage - 2 1/2"
  • For pulldown rig
  • Grease-lubricated bearings
  • Adjustable packing
  • Packing can be changed without disassemble
  • Adjustable tapered roller bearing

Weight Capacity
  • Static - 60,000 lbs.
  • Rotating - 28,000 lbs. @ 100 rpm
Technical Data
Width Hose Connection Lower Connection Fluid Passage Working Pressure
9 1/8" 3" 3 1/2" IF 2 1/2" to 300 psi

Parts List
Part Number Description Quantity Required
25DM-8050-XX Swivel, adjusting nut with lock nut, 2 1/2" NPT female hose connection, adjustable packing. 2" OD pins on 9 1/8" shoulders, with 3 1/2" IF LH pin connection
15WMA-04B Gooseneck, adjustable (2 1/2" NPT female) 1
15WMA-15 Stud with nut 4
15WX-05 Packing 2
15WX-05-90 Packing, 90 Duro Optional
15WX-06 Wearbushing 1
15WX-07 Housing seal 1
OR-036 O-Ring, adjusting gland 2
15WXA-19-R Adjusting gland 1
15WXA-20 Adjusting screw with nuts 2
25CHD-06 Lower seal box 1
25AM-07 Housing seal 1
25CHD-12 Bearings, cup and cone 2
25DM-02R Plate, cover 1
25DM-05-LN Bearing locknut 1
25DM-05R Adjusting nut 1
25DM-08R Spindle, 3 1/2" IF LH pin 1
25DM-10 Bearing shield 1
25DM-11R Plate, lock 1
25DM-14 Bearing housing with pins, 2" OD, 9 1/8" shoulders 1
OR-263 O-Ring cover plate 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

25AM Swivel


  • Adjustable Chevron packing
  • 2 1/2" fluid passage
  • For pulldown rigs
  • Adjustable packing
  • Grease-lubricated packing and bearing
  • Adjustable tapered roller bearings
  • Bolt-in packing capsule (quick change)

Weight Capacity
  • Static Load - 60,000 lbs.
  • Rotating Load - 28,000 lbs. @ 100 rpm
Technical Data
Width Hose Connection Lower Connection Fluid Passage Working Pressure
9 1/8" 3" NPT 3 1/2" IF 2 1/2" to 1500 psi

Parts List
Part Number Description Quantity Required
25AM-8010-XX Swivel, high pressure with adjustable packing, 3" hose connection with 2" OD pins on 9 1/8" shoulders with 3 1/2" IF LH pin connection
13RG-05 Packing seat ring 1
13RG-06 Lantern ring 1
25AM-18 Packing box 1
25AM-20 Packing adjusting gland 1
25AM-04 Bonnet 3" NPT hose straight up 1
25AM-05 Bearing nut 1
25AM-05A-1 Set screws, adjusting nut 2
25CHD-06 Lower seal box 1
25AM-07 Housing seal 2
25CHD-26 Mud slinger 1
25AM-09 Bearing spindle 1
25CHD-12 Bearings, cup and cone 2
25AM-16 Lower sub, 3 1/2" IF LH pin 1
25AM-16A-1 Set screws, lower sub 2
25CHD-19 Packing gland 1
25CHD-25 Washpipe 1
25CHD-25A Cap screws, washpipe 4
OR-233 O-Ring, spindle thread seal 1
OR-235 O-Ring, washpipe 1
OR-341 O-Ring, bearing adjusting nut 1
OR-342 O-Ring, packing gland 1
OR-347 O-Ring, packing box 1
25DM-14 Bearing housing, 2" OD pins on 9 1/8" shoulders 1
75WPW-15 Packing set 1
75WPW-15-416 Packing set, low pressure Optional
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

25CHD Swivel


  • 2 1/2" fluid passage
  • For pulldown rigs
  • Adjustable tapered roller bearings
  • Grease-lubricated packing and bearing
  • Fits all TH60, T-3W, and other drills

Weight Capacity
  • Static - 90,000 lbs.
  • Rotating - 40,000 lbs. @100 rpm
Technical Data
Length Width Weight Hose Connection Lower Connection Fluid Passage Working Pressure
45 1/2" 26 5/8" 345 lbs. 3" NPT 3 1/2" IF 2 1/2" to 1500 psi

Parts List
Part Number Description Quantity Required
25CHD-8030-XX Swivel with yoke assembly, 3" NPT female hose connection, straight up, Chevron (V-ring) packing, with 3 1/2" IF LH pin lower connection. Fixed packing, no adjustment
13RG-05 Packing seat ring 1
13RG-06 Lantern ring 1
25CHD-01 Yoke assembly 1
25CHD-02R Trunnion pins 2
25CHD-03 Bushing, trunnion pins 2
25CHD-04A Bonnet, 3" NPT female hose connection straight up 1
25CHD-06 Lower seal box 1
25CHD-07R Seal, upper housing (seal box) 1
25CHD-07-Rubber Seal, upper housing (bonnet) 1
25CHD-08 Bearing adjusting nut 1
25CHD-10 Bearing lock nut 1
25CHD-11 Seal, lower housing 1
25CHD-11A Sleeve, lower wear 1
25CHD-12 Bearing (cup and cone) 2
25CHD-13 Adapter, washpipe 1
25CHD-14 Bearing housing 1
25CHD-16 Spindle, 3 1/2" IF LH pin 1
25CHD-18 Packing box 1
25CHD-19 Packing gland 1
25CHD-24 Seal box, upper 1
25CHD-25 Washpipe 1
25CHD-25A Cap screws, washpipe 4
25CHD-26 Slinger ring 1
25DM-10 Bearing shield 1
OR-234 O-Ring, spindle 1
OR-235 O-Ring, washpipe 1
OR-263 O-Ring, seal box and bonnet 2
OR-342 O-Ring, packing gland 1
OR-347 O-Ring, packing box 1
75WPW-15 Packing 1
75WPW-15-416 Packing (low pressure) Optional
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

25CHD-R Swivel and Parts


  • 2 1/2" fluid passage
  • For pulldown rigs
  • Adjustable tapered roller bearings
  • Adjustable Chevron packing
  • Grease-lubricated packing and bearing
  • Fits all TH60, T-3W, and other drills
  • Bolt-in packing capsule (quick change)

Weight Capacity
  • Static - 90,000 lbs.
  • Rotating - 40,000 lbs. @100 rpm
Technical Data
Length Width Weight Hose Connection Lower Connection Fluid Passage Working Pressure
45 1/2" 26 5/8" 345 lbs. 3" NPT 3 1/2" IF 2 1/2" to 1500 psi

Parts List
Part Number Description Quantity Required
25CHD-R-8011-XX Swivel, with yoke assembly, 3" NPT female hose connection, straight up, adjustable Chevron (V-ring) packing, with 3 1/2" IF LH pin connection
13RG-05 Packing seat ring 1
13RG-06 Lantern ring 1
25CHD-01 Yoke assembly 1
25CHD-02R Trunnion pins 2
25CHD-03 Bushing, trunnion pins 2
25CHD-04 Bonnet, 3" NPT female hose connection, straight up 1
25CHD-06 Lower seal box 1
25CHD-07R Seal, upper housing (seal box) 1
25CHD-07-Rubber Seal, upper housing (bonnet) 1
25CHD-08 Bearing adjusting nut 1
25CHD-10 Bearing lock nut 1
25CHD-11 Seal, lower housing 1
25CHD-11A Sleeve, lower wear 1
25CHD-12 Bearing (cup and cone) 2
25CHD-13 Adapter, washpipe 1
25CHD-14 Bearing housing 1
25CHD-16 Spindle, 3 1/2" IF LH pin 1
25AM-18 Packing box 1
25CHD-19 Packing gland 1
25AM-20 Packing adjusting gland 1
25CHD-24 Seal box, upper 1
25CHD-25 Washpipe 1
25CHD-25A Cap screws, washpipe 4
25CHD-26 Slinger ring 1
25DM-10 Bearing shield 1
OR-234 O-Ring, spindle 1
OR-235 O-Ring, washpipe 1
OR-263 O-Ring, seal box and bonnet 2
OR-342 O-Ring, packing gland 1
OR-347 O-Ring, packing box 1
75WPW-15 Packing 1
75WPW-15-416 Packing (low pressure) 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

30PG Swivel


  • For deep water well, workover, and shallow oil well drilling
  • Hardened ground washpipe and Chevron (V-ring) packing, grease lubricated
  • Oversized watercourse, 3" ID
  • Flexible bail or elevator shank available
  • Adjustable packing
  • Packing can be changed quickly without disassembling swivel
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available for pull down rigs
  • Large choice of optional lower connections threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 95,000 lbs.
  • Rotating Load - 60,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 6,400 ft.
  • Safe Depth - 2 7/8" - 4,000 ft.
  • Safe Depth - 3 1/2" - 3,400 ft.
  • Safe Depth - 4 1/2" - 2,600 ft.
Technical Data
Overall Length Weight (each) Hose Conn. female Lower Conn. Pin Watercourse Working Pressure Bail Opening
45" 225 lbs. 3" NPT 4 1/2" OD 8V LH Max. 3 " ID to 1500 psi 5" x 8"

Parts List
Part Number Description Quantity Required
30PG-6500-XX Western swivel, less bail or elevator shank, 3" NPT female hose connection, with 4 1/2" OD 8V LH pin lower connection
Additional for bail, elevator shank (3 1/2" OD or smaller), pulldown trunnion pins, and "Special" lower connection
30WX-01 Bail Optional
30WX-01E Elevator shank (3 1/2" OD or smaller) Optional
30WX-02 Bail pin 1
20WX-02A Bail pin nut 2
30PG-04A Gooseneck, 3" NPT female hose 1
5JW-07 Housing seal 2
30PG-08 Bearing spindle 1
30WX-09 Shield seal 1
30WX-10 Bearing shield 1
5JW-11 Bearing retainer wire 1
5JW-12 Bearings       (30PG uses only 4 bearings) 4
30WX-14 Bearing housing 1
30WX-14A Bearing housing with pins, 2"OD on 8 15/16" shoulders Optional
15WX-15 Housing bolt and nut 1
30PG-16KD-LP Lower connection, 4 1/2" OD 8V LH pin 1
30PG-16JG-LP Lower connection, 3 1/2" full hole LH pin Optional
5JW-17 Spindle thread seal 1
40PG-40 Packing capsule 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

40PG Swivel


  • For deep water well, workover, and shallow oil well drilling
  • Hardened ground washpipe and Chevron (V-ring) packing, grease lubricated
  • Oversized watercourse, 3" ID
  • Flexible bail or elevator shank available
  • Adjustable packing
  • Packing can be changed quickly without disassembling swivel
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available for pull down rigs
  • Large choice of optional lower connections threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 140,000 lbs.
  • Rotating Load - 71,000 lbs @ 100 RPM
  • Safe Depth - 2 3/8" 8,000 ft.
  • Safe Depth - 2 7/8" 5,000 ft.
  • Safe Depth - 3 1/2" 3,800 ft.
  • Safe Depth - 4 1/2" 3,000 ft.
Technical Data
Overall Length Weight (each) Hose Connection (female) Lower Connection Pin Watercourse Working Pressure Bail Opening
57" 347 lbs. 3" NPT 4 1/2" OD 8V LH Max. 3" ID to 1500 psi 6" x 14"

Parts List
Part Number Description Quantity Required
40PG-6000-XX Western swivel, less bail or elevator shank, 3" NPT female hose connection, with 4 1/2" OD 8V LH pin lower connection
Additional for bail, elevator shank (3 1/2" OD or smaller), trunnion pins, and "Special" lower connection
40PG-01 Bail Optional
40PG-01E Elevator shank (3 1/2" or smaller) Optional
40PG-02 Bail pin 1
40PG-03 Bail pin nut 2
40PG-04A Gooseneck, 3" NPT female hose connection 1
40PG-07 Housing seal 3
40PG-08 Bearing spindle 1
30WX-09 Shield seal 1
30WX-10 Bearing shield 1
5JW-11 Bearing retainer wire 1
5JW-12 Bearing upthrust / downthrust 5
40PG-14B Bearing housing 1
40PG-14A Bearing housing with pins, 2" OD on 8 15/16" shoulders Optional
15WX-15 Housing lock bolt and nut 1
40PG-16KD-LP Lower connection, 4 1/2" OD 8V LH pin 1
40PG-16JG-LP Lower connection, 3 1/2" full hole LH pin Optional
40PG-16JE-LP Lower connection, 3 1/2" IF LH pin Optional
5JW-17 Spindle thread seal 1
40PG-40 Packing capsule 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

50PG Swivel


  • For deep water well, workover, and shallow oil well drilling
  • Hardened ground washpipe and Chevron (V-ring) packing, grease lubricated
  • Oversized watercourse, 3" ID
  • Flexible bail or elevator shank available
  • Adjustable packing
  • Packing can be changed quickly without disassembling swivel
  • Thrust ball bearings support drill pipe load while providing radial capacity
  • Seal bearing case with grease lubrication
  • Trunnion pins available for pull down rigs
  • Large choice of optional lower connections threads
  • Designed for easy field service and maintenance

Safe Weight Loads
  • Static Load - 160,000 lbs.
  • Rotating Load - 87,000 lbs. @ 100 rpm
  • Safe Depth - 2 3/8" - 10,000 ft.
  • Safe Depth - 2 7/8" - 6,200 ft.
  • Safe Depth - 3 1/2" - 4,800 ft.
  • Safe Depth - 4 1/2" - 3,800 ft.
Technical Data
Overall Length Weight (each) Hose Conn. female Lower Conn. Pin Watercourse Working Pressure Bail Opening
63" 512 lbs. 3" NPT 4 1/2" Reg LH Max. 3 " ID to 1500 psi 7" x 16"

Parts List
Part Number Description Quantity
Required
50PG-6300-XX Western swivel, less bail, 3" NPT female hose connection, with 4 1/2" Reg LH pin lower connection
Additional for bail, elevator shank (3 1/2" OD or smaller), pulldown trunnion pins, and 6 5/8" Reg LH pin lower connection
50PG-01 Bail Optional
50PG-01E Elevator shank (3 1/2" or smaller) Optional
50PG-02 Bail pin 1
40PG-03 Bail pin nuts 2
50PG-04A Gooseneck, 3" NPT female hose connection 1
5JW-07 Upper housing seal 1
50PG-07 Lower housing seal 2
50PG-08 Bearing spindle 1
50PG-09 Felt seal 1
50PG-10 Bearing shield 1
50PG-11 Bearing retainer wire 1
50PG-12 Bearings 5
50PG-14 Bearing housing 1
50PG-14A Bearing housing with trunnion pins Optional
15WX-15 Housing lock bolt and nut 1
50PG-16KF-LP Lower connection, 4 1/2" Reg LH pin 1
50PG-160F-LP Lower connection, 6 5/8" Reg LH pin Optional
5JW-17 Spindle thread seal 1
40PG-40 Packing capsule 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

60PG Swivel


  • Designed for water well, but oilfield tough
  • Full 3" fluid passage
  • Adjustable tapered roller bearing
  • Oil-lubricated bearings
  • Adjustable, grease-lubricated Chevron packing
  • Available with trunnion pins for pulldown
  • Floating washpipe

Weight Capacity
  • Static - 87.5 tons
  • Rotating - 81,000 lbs. @ 100 rpm
Technical Data
Length Width Weight Hose Connection Lower Connection Fluid Passage Working Pressure
46 21/32" 22 1/16" 995 lbs. 3" NPT 4" IF 3" to 3000 psi

Parts List
Part Number Description Quantity Required
60PG-6400-XX Swivel with bail, 3" NPT female hose connection, straight out, with 2" OD trunnion pins on 14 1/4" shoulders, with 4" IF LH pin lower connection, 3" fluid passage
60PG-01 Bail 1
60PG-03 Gooseneck assembly, 3" NPT hose connection, straight out 1
60PG-04 Bonnet 1
60PG-05 Packing adjustment gland 1
60PG-06 Lower housing seal 2
60PG-07 Upper housing seal 2
60PG-08 Bearing shield 1
60PG-09 Bearing adjusting nut 1
60PG-10 Bearing lock nut 1
60PG-11 Bearing adjustment nut lock ring 1
60PG-12 Bearing, main assembly (cup and cone) 1
60PG-13 Bearing, lower assembly (cup and cone) 1
60PG-14A Bearing housing for bail 1
60PG-15 Oil box 1
60PG-16IE-LP Spindle , 4" IF LH pin 1
60PG-18 Packing box 1
60PG-19 Packing gland 1
60PG-22 Packing seat ring 1
60PG-23 Bail pins 2
60PG-24 Nut, washpipe holddown 1
60PG-25 Washpipe 1
5JW-20 Packing 1
5JW-21 Lantern ring 1
OR-237 O-Ring, washpipe 1
OR-353 O-Ring, packing box 1
OR-380 O-Ring, bonnet 1
OR-430 O-Ring (stem / adjusting nut) 1
OR-448 O-Ring (oil box) 1
6WC-02A Retainer, bail pin 2
OR-342 O-Ring (gooseneck) 1
OR-344 O-Ring (packing gland) 1
OR-346 O-Ring (packing gland) 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

Packing Assembly for 30PG, 40PG, 50PG Swivel


  • Fits all KG and PG swivels
  • Grease-lubricated Chevron (V-ring) packing
  • Adjustable
Parts List
Part Number Description Quantity Required
40PG-40 Packing Assembly (complete) 1
40PG-18 Packing box 1
40PG-19 Packing gland 1
5JW-20 Packing set 1
5JW-20-416 Packing set (low pressure) Optional
5JW-21 Lantern ring 1
40PG-22 Packing seat ring 1
40PG-24 Packing adjustment screw and nut 2
5JW-25 Washpipe 1
OR-339 O-Ring (washpipe) 1
OR-344 O-Ring (packing gland) 1
OR-346 O-Ring (packing gland) 1
Other sizes of connections available, please call. Option for above swivel may affect pricing of complete swivel. Other options available, please call.

1350 E. Glendale Avenue Sparks, NV 89431 | © 2004-2021 America West Drilling Supply, All Rights Reserved.

Go to our Facebook Page

water well drill pipe