English

English中文

Two stage screw compressor H series

Two stage screw compressor H series

Working Power: 90~315KW
Free Air Delivery: 14~68m³/min
Working Pressure: 7/8/10/12.5bar

inquiry
product video

product advantages
  • 1 Less Power, similar capacity, good energy saving

    Compare with the standard compressor, the two stage screw compressor has better efficiency, it can save more than 10% energy compare with the standard compressor that both work at 100% loading.

  • 2 Isothermal Compression

    AFE31 is area of isothermal compression

    AC31 is area of standard compression

    AB,BF,FD,31 is area of two stage compression

    Two stage compression saving area is BCDF comparison with standard compression

    ★After first grade compression, the volume of compressed air become smaller, then the second compression could use smaller rotor, which reduce the compression leakage.

    ★It reduce compression ratio,  reduce the leakage.

  • 3 Heavy Duty Air Filter:

    Double imported safety filter core,improve air filtration effect, Long service life,Large filtration area, Low suction resistance,improve air inlet efficiency.  Specially for the dusty environment, like cement industry, textile industry, fibre industry, chemical industry etc. 

  • 4 Oil/air tank(125HP-300HP)

    Big capacity oil tank, Hold internal pressure, Reduce Lubricating oil producing foam. 

    Tank cover design with SCR rotating shaft, Simplify oil separator core replacement

    Enlarge oil separator core size , Better separation effect, Reduce the pressure drop during operating period, Improve system efficiency

    Double oil separator core is for big size type above 340HP and above, to help better oil separation.

    Oil content is less than 3PPM during 4000Hours running period.

product parts
product details
① Permanent magnet (PM) motor ● Exceeds IE4 efficiency standards

● IP55 protection grade

● VSD PM motor

● F Insulation Grade

● PTC protecion for PM motor

② Innovative airend

● New improved rotor profile for low pressure application

● R&D in japan

● High quality class leading bearings

● Designed to give 20 years of reliable operation



③ inlet filter ● Nano scale heavy duty

● Filtration accuracy upto 99.9%

● Captures dust particles below 0.3 micron

● Pressure drop indicator

● 2,000 hours service intervals



④ Centrifugal fan ● VSD control ● Compact ● Low noise level ● High capacity for optimized cooling ● Low power consumption
⑤ Classic cooler design ● Combined oil and after cooler ● Easy access for maintenance ● Anti corrosion surface coatings

● 20% oversized cooler design

● After cooler is optional

⑥ innovative vectorial inverter ● CE/UL certification

● Wide voltage design

● Meet EMC C3 and C2 requirements

● Built-in DC reactor

● Independent cooling air duct design


⑦ SCR 9000 touch controller ● 7” Full colour touchscreen controller

● Full features protection, including over temp. Protection, over pressure protection, motor overload, phase unbalance etc. more than 13itmes protection

● Support Modbus RTU, and can realize remote monitoring.


⑧ Inlet valve ● Optimizes the inlet flow of the air end. ● No blow-off losses  Maintenance free pipe design

Large suction area,special design for low pressure application


⑨ Oil filter ● High efficiency oil filter removes reliably removed contaminants from the oil ● Oil particles can be controlled at 0.1 micron

● Ensures a smooth and well-lubricated oil system

● Multiple oil filter combination,enhance stable operation

⑩ Gas tank & built-in separation system ● Oversized air and oil tank improves the cyclone effect maximising the seperation process ● The high efficiency oil seperator ensures that the oil carry over is less than 3ppm. ● System pressure loss:less than 0.02Mpa
⑪ electrical control cabinet ● Siemens core electrical components are used to further enhance reliabity.
⑫ all-steel internal pipe system ● All steel internal pipe work is used to prevent leakage and premature ageing often seen with flexible pipes ● Reduced friction losses
product parameter
Model KW HP Capacity
(m3/min)
Pressure
(BAR)
Dimension
(mm)
Weight
(KG)
Size
SCR125H-7 90 125 21 7 2800*1750*1700 3200 DN65
SCR125H-8 19.4 8
SCR125H-10 17.5 10
SCR125H-12.5 14 12.5
SCR150H-7 110 150 25 7 2800*1750*1700 3500 DN65
SCR150H-8 23.6 8
SCR150H-10 20 10
SCR150H-12.5 17 12.5
SCR180H-7 132 180 30 7 3400*2100*2000 4700 DN80
SCR180H-8 29.5 8
SCR180H-10 24 10
SCR180H-12.5 20 12.5
SCR220H-7 160 220 35 7 3400*2100*2000 4900 DN80
SCR220H-8 34.5 8
SCR220H-10 29 10
SCR220H-12.5 24 12.5
SCR250H-7 185 250 40 7 3400*2200*2100 5800 DN100
SCR250H-8 39.5 8
SCR250H-10 34 10
SCR250H-12.5 30 12.5
SCR270H-7 200 270 44 7 3400*2200*2100 6000 DN100
SCR270H-8 43 8
SCR270H-10 39 10
SCR270H-12.5 33 12.5
SCR300H-7 220 300 48 7 3400*2200*2100 6600 DN100
SCR300H-8 47 8
SCR300H-10 42 10
SCR300H-12.5 38 12.5
SCR340H-7 250 340 55 7 4000*2150*2300 7000 DN100
SCR340H-8 54 8
SCR340H-10 46 10
SCR340H-12.5 41 12.5
SCR375H-7 280 375 62 7 4000*2150*2300 7400 DN125
SCR375H-8 61 8
SCR375H-10 53 10
SCR375H-12.5 46 12.5
SCR400H-7 315 400 68 7 4000*2150*2300 7900 DN125
SCR400H-8 67 8
SCR400H-10 61 10
SCR400H-12.5 51 12.5
SCR830LHPM 90 120.6 7.1-23.7 4.5 2900*1850*1950 3570 DN100
5.5
SCR950LHPM 110 147.4 8.5- 28.2 4.5 2900*1850*1950 3650 DN100
5.5
SCR1200LHPM 132 176.9 10.3-34.2 4.5 3000*2050*2100 4300 DN125
5.5
SCR1300LHPM 160 214.4 12.5-41.6 4.5 3000*2050*2100 4500 DN125
5.5
SCR1500LHPM 185 247.9 14.1-46.9 4.5 3300*2200*2250 4800 DN150
5.5
SCR1900LHPM 200 268 15.0-50.0 4.5 3300*2200*2250 5500 DN150
5.5

Note:

The capacity is measured as GB3853 standard.(equivalent to ISO1217 Annex C)

Standard voltage is 380V/50HZ/3P, other voltage is available.

The recommended best capacity range is 60%-100%.

Alpine/high altitude, high temperature, high huidity, high dust loads or other adverse working conditions will require specialized custom designs. These are available on special request.

We reserve the right to make changes and improvements to the design and appearance.

Specifications may change without prior notice.

Related cases
SCR use two stage compressor to replace the customer old machinine Together with our partner in Europe, we use high efficiency two stage compressor to replace the customer old style compressor, and make contract with the customer to sell them compressed air, so customer no need to invest the equipment, they pay the cost according to the compressed air that they use, this is the mutual benefit for both side.
South Korea customer use SCR high efficiency low pressure compressor,save more for their operation cost One of our customer in South Korea, they ever to use standard compressor for their factory processing, however, the compressor outlet pressure is higher than their machine pressure requirement, so with the help of our partner in South Korea
Permanent Magnetic compressor help customer save their electric cost In 2015, SCR develop the new innovation oil cooling Permanent Magnetic compressor, which is the latest technology with fantastic energy saving solution for the compressor. The latest IP65 protection grade PM motor is best match for dusty en
YOU MAY LIKE
Copyright ©Shanghai Screw Compressor Co., Ltd(SCR) All rights reserved. privacy statement terms & conditions SITEMAP Technical Support:NSW CNZZ
English

English中文

Double Stagle Screw Compressor