[email protected];+48 508 154 601
DPRS Poland offers a highly flexible SM1 hose from SEMPERIT with extreme abrasion resistance.
Application:
Sand blasting, shot blasting, corundum, glass, sand, shots, etc.
Benefits:
Very high strength of the inner layer for abrasion
Resistance to abrasion 36mm3 acc. DIN 53516: 1987
It does not cause electrostatic shocks while maintaining work safety.
Extremely long service life due to the high abrasion resistant quality of the tube.
Average wear of the tube 36 mm3 (according to DIN ISO 4649:2014).
Antistatic construction prevents the build-up of static electricity.
Standard/approval: Exceeds EN ISO 3861:2008.
Notice: A reinforced insert package for increased stability is available upon request.
Temperature range: -35°C / +80°C.
Safety factor: 3.5 : 1
Tube: SBR/NR/BR, black, smooth, electrically conductive, highly abra sion resistant.
Reinforcement: Textile wrapped.
Cover: SBR, black, antistatic, cloth impression.
Marking: Continuous transfer tape, yellow: „SEMPERIT S SM1® Sandstrahl-Shotblast Strahlmeister® PN 12 bar“.
DPRS Poland offers sandblasting and shot blasting hose ANF made by NORTH FIGHTER
Application:
Highly flexible pressure hose with extreme abrasion resistance.
Designed for sanding, shot blasting, transfer of corundum, glass, sand, shots, etc.
Benefits:
Very high durability of the inner and outer layer for abrasion
Resistance to abrasion 40mm3 acc.
It does not cause electrostatic shocks while maintaining work safety.
Temperature range: -35 ° C / +80 ° C.
Safety factor: 3: 1
Inner layer: SBR / NR / BR, black, smooth, anti-static, very resistant to abrasion
Strengthening: textile
Outer layer: SBR, black, anti-static, reflection of the bandage
Marking: yellow markings: „NORTH FIGHTER SANDBLAST HIGH DURABILITY ANF40 R <10 6Ohm/m Abrasion <40mm3 WP 12 / PB 36 BAR [SIZE]“
Application: Flexible hose for automotive cooling systems
Advantages: The hose is resistant to hot water, hot air and antifreeze. Ozonoodporny
Standards: ISO 4081: 1987 Type 1A.
Note: Close to DIN 7341 1: 1996, Teil 1 and 2
FKD-R …….. 68201 #### …… in rolls
FKD-S …….. 68204 #### …… in episodes
Temperature range: -35 ° C / +100 ° C
Safety factor: 2.5: 1
Tube: EPDM, black, smooth
Reinforcement: textile
Cover: EPDM, black, smooth, weather resistant and ozone
Marking: white continuous inscription: „SEMPERIT S FKD Kuhlwasser / Cooling Water ID x EPDM / PES / EPDM Quartal / Jahr“.
Application: Flexible hose for car air systems.
Also suitable for transfer of water or air in industrial applications.
Standards: SAEJ 1402: 1985, Type A.
Temperature range: -40 ° C / +95 ° C.
Safety factor: 4.5: 1
Tube: CR / NBR, black, smooth, oil resistant
Reinforcement: textile.
Cover: CR, black, smooth.
Marking: white continuous inscription: „Semperit S FBS Bremschlauch / Air-Brake SAE 1402 DN PN 14 bar“.
Application: Flexible hose for car air systems.
Also suitable for transfer of water or air with oil particles in industrial applications.
Standards: SAEJ 1402: 1985, Type A.
Temperature range: -40 ° C / +95 ° C.
Safety factor: 4.5: 1
Tube: CR / NBR, black, smooth, oil resistant
Reinforcement: textile.
Cover: CR, black, smooth.
Marking: white continuous inscription: “Semperit S FBS Bremschlauch / Air-Brake SAE 1402 DN PN 14 bar”.
Brake Hose
Application: A flexible hose for hydraulic vehicle brake systems using glycine- based liquids.
Feature: Resistant to low temperatures.
Standard/approval: SAE J1401:2013. EAC (TR CU 018/2011).
Temperature range: -45°C / +70°C.
Safety factor: 7:1
Tube: SBR/BR, black, smooth.
Reinforcement: Textile braided.
Cover: EPDM, black, 2 yellow longitudinal stripes, smooth, oil and ozone resistant.
Marking: Continuous coloured marking, white: „DOT SEMPERIT 1/8 HL SAE J1401 MADE IN EU“. Opposite side continuous coloured marking, white: „Month/Year“
Propane Butane Hose
Application: Hose for transporting propane- butane gas at low pressure in vehicles.
Temperature range: -40°C / +85°C
Safety factor: 4:1
Tube: NBR, black, smooth.
Reinforcement: Textile spiral construction.
Cover: SBR/EPDM, black, smooth.
Marking: Continuous coloured marking, white: “SEMPERIT S FPB LPG PN 4,5 bar DN quarter/year”.
Tanker S & D Hose
Application:
Suction and delivery hose for filling and discharging tanks, petrol tankers and ships with unleaded fuels (EN228:2012) with an aro matic content of components 50% max.
Safety factor: 3:1
Temperature range: -40°C / +90°C (for oils +100°C).
Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, zinc plated double steel wire helix (ID > 2 1/2″ zinc plated steel wire helix), 2 crossed copper wires.
Cover: SBR/EPDM, black, abrasion resistant, ozone resistant, oil resistant (according SAE J517:2013), cloth impression.
Marking: Continuous transfer tape, yellow: “SEMPERIT (S) TM30 PETROLEUM / OIL S&D WP 10 BAR Made in Europe”
Suitable for industrial oils, diesel oils (EN 590:2010), fuel oils (DIN 51 603 parts 1 – 5) and mineral oil-based hydraulic oils.
The hose must not be immersed in oil because the outer layer reacts.
ransport / Petrol Tank Hose
Application: Constant volume, certified reel mounted hose suitable for deliver ing unleaded fuels (EN 228:2008) with oxygen components lim ited according to EEC 85/536 and with an aromatic content of 50% max.
Temperature range: -30°C / +90°C.
Safety factor: 4:1
Tube: NBR, black, smooth, electrically conductive.
Reinforcement: Textile braided (ID < 75mm, wrapped), 2 crossed copper wires.
Cover: CR, black, electrically conductive, abrasion resistant, oil and weather resistant, cloth impression.
Marking: Continuous ink transfer tape, yellow: „SEMPERIT S TM2 Mineralöl/Oil Tankmeister® 2 PN 20 bar R < 106 Ohm“ as well as continuous embossed labelling according to EN 1761:1999 and EN12115:2011 Ω / T.
Suitable for industrial oils, diesel oils (EN 590:2010), fuel oils (DIN 51 603 parts 1 – 5), mineral oil-based hydraulic oils.
Also suitable for applications according to EN 12115 in the petro chemicals industry.
Feature: This hose has been tested according to the technical regulations for combustible liquids (TRbF) 131/2:1992.
Standard/approval: EN 1761:1999, EN 12115:2011
Notice: To ensure the assembly is leakproof, it must be tested according to EN 1761:1999 and EN 12115:2011